ANT7-M24LR16E STMicroelectronics

ANT7-M24LR16E 15 mm x 15 mm double layer antenna reference board for the M24LR16E-R Dual Interface EEPROM Data brief Features Ready-to-use printed circuit board (PCB) including 15 mm x 15 mm 13.56 MHz inductive antenna etched on the PCB M24LR16E-R Dual Interface EEPROM 2 I C connector Energy harvesting output (V ) with a OUT 10 nF capacitance filtering circuit RF WIP/BUSY output with 20 k pull-up resistor, to indicate that an RF operation is The ANT7-M24LR16E antenna allows system ongoing designers to evaluate the M24LR16E-R performance and capabilities, and to get started Description with their design. To demonstrate the energy harvesting function, The ANT7-M24LR16E antenna reference board is the ANT7-M24LR16E can be used in conjunction a ready-to-use PCB that features an M24LR16E- with ST DEMO-CR95HF-A demonstration board. R Dual Interface EEPROM IC connected to a 15 mm x 15 mm 13.56 MHz etched RF double The application can be powered directly from the 2 layer antenna on one side, and to an I C bus on M24LR16E-R V pin. OUT the other side. The ANT7-M24LR16E Gerber files can be downloaded from Associated firmware and PC software ANT7-M24LR16E Associated firmware and PC software The ANT7-M24LR16E board is supported by a PC software, the Dual Interface EEPROM tool software, that allows to configure and control the energy harvesting. This software is available from