BALF-112X-02D3 STMicroelectronics

BALF-112X-02D3 50 ohm nominal input / conjugate match balun CC1120, CC1125, 433 MHz, with integrated harmonic filter Datasheet - production data Description STMicroelectronics BALF-112X-02D3 is an ultra-miniature balun, integrating both matching network and harmonics filter. Matching impedance has been customized for the CC1120, CC1125, CC1175 and CC1200 transceivers from Texas Instruments. The device uses STMicroelectronics IPD technology on a non-conductive glass substrate, Flip-Chip (8 bumps) package which optimizes RF performance. Figure 1: Application schematic Features 50 nominal input / conjugate match to CC1120, CC1125, CC1175, CC1200 Low insertion loss Low amplitude imbalance Low phase imbalance Small footprint Benefits Very low profile (< 630 m thickness) High RF performance RF BOM and size reduction Applications C10 is a DC block capacitor: 0402/100 pF/50 V 433 MHz impedance-matched balun filter optimized for Texas Instruments CC1120, CC1125, CC1175, CC1200 sub-GHz RFICs February 2017 DocID029426 Rev 2 1/12 www.st.com This is information on a product in full production. Characteristics BALF-112X-02D3 1 Characteristics Table 1: Absolute maximum ratings (limiting values) Value Symbol Parameter Unit Min. Typ. Max. PIN Input power RFIN - 20 dBm ESD ratings MIL STD883C (HBM: C = 100 pF, 1300 - R = 1.5 , air discharge) V V ESD ESD ratings machine model (MM: C = 200 pF, 250 - R = 25 W, L = 500 nH) T Operating temperature -40 - +85 C OP Table 2: Electrical characteristics and RF performance (Tamb = 25 C) RX balun Value Symbol Parameter Unit Min. Typ. Max. Match to Z Nominal differential impedance RX CC112X Z Antenna impedance 50 ANT f Frequency range (bandwidth) 431 436 MHz S21 Insertion loss in bandwidth -1.9 -1.7 dB RX-ANT S11ANT Input return loss in bandwidth -20 -18 dB Phase imbal Output phase imbalance 0 1.7 10 Ampl imbal Output amplitude imbalance 0.3 1 dB 2/12 DocID029426 Rev 2