ECMF06-6HSM16 STMicroelectronics

ECMF06-6HSM16 Common mode filter with ESD protection for high speed serial interface Datasheet - production data Features Very large differential bandwidth to comply with HDMI Full HD, MIPI, USB2.0, USB3.0, Display Port and other high speed serial interfaces Provides -20 dB attenuation at 700 MHz in LTE bands High common mode attenuation: -25 dB between 800 MHz - 900 MHz Very low PCB space consumption Thin package: 0.55 mm max. QFN-16L 4.10 x 1.35 mm Lead-free package High reduction of parasitic elements through integration. Figure 1. Pin configuration (top view) Complies with the following standards: IEC 61000-4-2 level 4: D1+ 1 16 D1+ 15 kV (air discharge) 8 kV (contact discharge) D1- 2 15 D1- Applications Mobile phones GND 3 14 GND Notebook, laptop Portable devices 4 13 D2+ D2+ PND Description D2- 5 12 D2- This device is a highly integrated common mode filter designed to suppress EMI/RFI common GND 6 11 GND mode noise on high speed differential serial buses like HDMI Full HD, MIPI, Display Port and other high speed serial interfaces.The device has D2+ D2+ 7 10 a very large differential bandwidth to comply with these standards. The device can protect and filter 3 differential lanes. D2- 8 9 D2- August 2014 DocID024992 Rev 2 1/13 This is information on a product in full production. www.st.comCharacteristics ECMF06-6HSM16 1 Characteristics Table 1. Absolute maximum ratings (T = 25 C) amb Symbol Parameter Value Unit IEC 61000-4-2 V Peak pulse voltage Contact discharge (connector side) 8 kV PP Air discharge (connector side) 16 I Maximum DC current 100 mA DC T Operating temperature range -40 to +85 C op T Maximum junction temperature 125 C j T Storage temperature range - 55 to +150 C stg Figure 2. Electrical characteristics (definitions) I Symbol Parameter V = Breakdown voltage BR I = Leakage current V RM RM V = Stand-off voltage RM I = Breakdown current V V R BR RM V I RM I R Table 2. Electrical characteristics (T = 25 C) amb Symbol Test conditions Min. Typ. Max. Unit V I = 1 mA 6 V BR R I V = 3 V per line 100 nA RM RM R DC serial resistance 5 DC Table 3. Pin description Pin Pin Pin Pin Description Description Description Description number number number number D1+ D2- D3- D2+ 1 5 9 13 to connector to connector to IC to IC D1- D3+ 2 6GND 10 14 GND to connector to IC D3+ D1- 3GND 7 11 GND 15 to connector to IC D2+ D3- D2- D1+ 4 8 12 16 to connector to connector to IC to IC 2/13 DocID024992 Rev 2