EVAL-VNH5019-P1 STMicroelectronics

EVAL-VNH5019-P1 VNH5019 Motor Driver Carrier Data brief - production data application, like pull-up s and protection resistors and FETs for reverse battery protection. This module is designed By POLOLU and distributed by ST. It is delivered fully populated with its SMD components, including the VNH5019, as shown in the product picture. For more information please visit Pololu web site. Table 1. Device summary Order code Reference Features EVAL-VNH5019-P1 EVAL-VNH5019-P1 Evaluation board Operating voltage: 5.5 - 24 V Output current: 12 A continuous (30 maximum) 5V and 3.3 V compatible inputs PWM operation up to 20 kHz for quieter motor operation Current sense output proportional to motor current Motor indicator LEDs (indicates what the outputs are doing even when no motor is connected) SPC5Studio makes it easy to get started using this board and SPC56 32-bit power architecture MCU s Robust: Reverse-voltage protection Can survive input voltages up to 41 V Undervoltage and overvoltage shutdown High-side and low-side thermal shutdown Short-to-ground and short-to-Vcc protection Description This module is a compact breakout board for ST s high-power VNH5019 motor driver IC, a fully integrated H-bridge that can be used for bidirectional speed control of a single brushed DC motor most of the components of the typical May 2014 DocID025580 Rev 2 1/3 This is information on a product in full production. For further information contact your local STMicroelectronics sales www.st.com office.Revision history EVAL-VNH5019-P1 1 Revision history Table 1. Documen revision history Date Revision Changes 06-Dec-2013 1 Initial release. Updated Description. 21-May-2014 2 Add Table 1. 2/3 DocID025580 Rev 2