LDCL015M33R STMicroelectronics

LDCL015 150 mA capless ultra low drop linear regulator ICs Datasheet - production data Description The LDCL015 provides 150 mA of maximum current from an input voltage ranging from 1.8 V to 5.5 V, with a typical dropout voltage of 50 mV. It is stable with no input or output capacitor. Low SOT23-5L quiescent current, low noise and capless operation make it suitable for low power battery- powered applications and allows the reduction of board size. Typical power supply rejection ratio is Features 52 dB at low frequencies, and starts to roll off at 10 kHz. The Enable logic control function puts the No input or output capacitor required LDCL015 in shutdown mode, reducing the total Input voltage from 1.8 V to 5.5 V current consumption to less than 1 A. The device also includes short-circuit constant current Very low drop: 50 mV at 100 mA load limit and thermal protection. Typical applications 2% output voltage accuracy are mobile phones, personal digital assistants and Output voltage tolerance over temperature: similar battery-powered systems. 3% Low noise 150 mA guaranteed output current Available in fixed and adjustable output voltages, from 0.8 V in 100 mV steps Internal current and thermal limit Operating temperature range: - 40 C to 125 C SOT23 5-lead package Applications Space-sensitive applications Battery-powered equipment Cordless and mobile phones Industrial and medical equipment Portable equipment Table 1. Device summary Markings Order codes Output voltages CL33 LDCL015M33R 3.3 V CLAD LDCL015MR Adjustable from 0.8 May 2014 DocID022166 Rev 3 1/17 This is information on a product in full production. www.st.comContents LDCL015 Contents 1 Block diagram 3 2 Pin configuration 4 3 Typical application 5 4 Maximum ratings 6 5 Electrical characteristics . 7 6 Typical performance characteristics 8 7 Application information . 11 7.1 General operation 11 7.2 Thermal and short-circuit protection 11 7.3 Output voltage setting for ADJ version 11 7.4 Enable pin .11 8 Package mechanical data 12 9 Packaging mechanical data 14 10 Revision history . 16 2/17 DocID022166 Rev 3