M24C04-FDW5TP STMicroelectronics

M24C04-W M24C04-R M24C04-F 4-Kbit serial IC bus EEPROM Datasheet - production data Features 2 Compatible with all I C bus modes: 400 kHz 100 kHz TSSOP8 (DW) Memory array: 169 mil width 4 Kbit (512 bytes) of EEPROM Page size: 16 bytes Single supply voltage: M24C04-W: 2.5 V to 5.5 V M24C04-R: 1.8 V to 5.5 V SO8 (MN) M24C04-F: 1.7 V to 5.5 V (full temperature 150 mil width range) and 1.6 V to 1.7 V (limited temperature range) Write: Byte Write within 5 ms Page Write within 5 ms (1) PDIP8 (BN) Operating temperature range: from -40 C up to +85 C Random and sequential Read modes Write protect of the whole memory array Enhanced ESD/Latch-Up protection UFDFPN8 More than 4 million Write cycles (MC) More than 200-year data retention Packages: 1. Not recommended for new designs. RoHS compliant and halogen-free (ECOPACK ) September 2013 DocID023994 Rev 3 1/34 This is information on a product in full production. www.st.comContents M24C04-W M24C04-R M24C04-F Contents 1 Description . 6 2 Signal description . 7 2.1 Serial Clock (SCL) . 7 2.2 Serial Data (SDA) 7 2.3 Chip Enable (E1, E2) . 7 2.4 Write Control (WC) . 7 2.5 V (ground) . 7 SS 2.6 Supply voltage (V ) . 8 CC 2.6.1 Operating supply voltage (V ) 8 CC 2.6.2 Power-up conditions 8 2.6.3 Device reset . 8 2.6.4 Power-down conditions 8 3 Memory organization 9 4 Device operation . 10 4.1 Start condition .11 4.2 Stop condition .11 4.3 Data input 11 4.4 Acknowledge bit (ACK) .11 4.5 Device addressing 12 5 Instructions . 13 5.1 Write operations 13 5.1.1 Byte Write . 14 5.1.2 Page Write . 15 5.1.3 Minimizing Write delays by polling on ACK 16 5.2 Read operations 17 5.2.1 Random Address Read . 18 5.2.2 Current Address Read 18 5.2.3 Sequential Read 18 2/34 DocID023994 Rev 3