M24LR-DISCOVERY M24LR-DISCOVERY evaluation kit Data brief SWIM connector for programming and Features debugging 2 M24LR board I C connectors M24LR04E-RMN6T/2 Dual Interface LCD (24 segments, 4 commons) 2 EEPROM with I C and ISO/IEC 15693 RF RF transceiver board interfaces, 4 Kbits of EEPROM and CR95HF-VMD5T 13.56 MHz multi-protocol password protection in SO8N package contactless transceiver IC with SPI and STM8L152C6T6 8-bit microcontroller, with UART serial access 8 Kbytes of Flash memory STM32F103CB 32-bit microcontroller, with STTS751-0WB3F, low-voltage digital 128 Kbytes of Flash memory temperature sensor 47 x 34 mm 13.56 MHz inductive antenna 20 x 40 mm inductive antenna etched on etched on PCB and associated circuitry the PCB USB connector for communication with Two function buttons (User and Reset) host PC and demonstration board powering Figure 1. M24LR board and RF transceiver board M24LR board RF transceiver board March 2015 DocID023090 Rev 3 1/5 For further information contact your local STMicroelectronics sales office. www.st.comDescription M24LR-DISCOVERY 1 Description M24LR-DISCOVERY is a ready-to-use kit which features the M24LR04E-R Dual Interface EEPROM IC. It addresses a wide range of applications such as industrial or medical equipment and consumer electronics. This kit contains 2 different boards, as shown in the figure on cover page. The M24LR board is battery-less and is powered by RFID readers or NFC-enabled phones supporting ISO/IEC 15693. The RF transceiver board is an RFID reader demonstration board and is composed, among other parts, of a CR95HF (13.56 MHz multi-protocol contactless transceiver IC with SPI and UART serial access). This board has to be plugged in to a PC and comes with a demonstration software. The M24LR board also works with Android NFC phones supporting ISO/IEC 15693. An application called NfcV-Reader is available on Google Play. Performance may vary depending on NFC phone s RF management. System requirements Windows PC (2000, XP, Vista, 7) ISO/IEC 15693 capable NFC phones 1.1 Demonstration software The M24LRxx application software can be uploaded from www.st.com and installed on your PC. It consists in: an M24LR/CR95 application software setup file STSW-M24LR011 an STM8L firmware, see STM8L firmware 1.1.1 M24LRxx application software The PC software allows to: 1. Launch setup.exe executable. 2. Choose CR95HF DEMO KIT tab. 3. Select demo NDEF messages tab. 4. Click on demo NDEF & Energy Harvesting tab. The latest versions of this demonstration source code and associated documentation can be downloaded from www.st.com. 1.1.2 STM8L firmware Development toolchain In case of an STM8L firmware change, the user has to download: STMicroelectronics, ST Visual Develop (STVD) 2/5 DocID023090 Rev 3