SMP100LC-90 STMicroelectronics

SMP100LC Trisil for telecom equipment protection Features Bidirectional crowbar protection Voltage range from 8 V to 400 V Low capacitance from 20 pF to 45 pF 2 V Low leakage current: I = 2 A max R SMB (JEDEC DO-214AA) Holding current: I = 150 mA min. H Repetitive peak pulse current: I = 100 A (10/1000 s) PP Benefits Trisils are not subject to ageing and provide a fail safe mode in short circuit for better protection. Helps equipment meet main standards such as UL60950, IEC 950 / CSA C22.2 and UL1459. Epoxy meets UL94, V0. Description Package is JEDEC registered (DO-214AA). The SMP100LC is a series of low capacitance transient surge arrestors designed for the Complies with the following standards protection of high data rate communication GR-1089 Core equipment. The low capacitance of the devices avoids any distortion of the signal and is ITU-T-K20/K21 compatible with digital transmission line cards IEC 61000-4-5 (xDSL, ISDN...). IEC 61000-4-2 level 4 SMP100LC series tested and confirmed TIA/EIA IS-968 compatible with Cooper Bussmann Telecom UL497B recognized, UL file E136224 Circuit Protector TCP 1.25A. The SMP100LC-xxx with the fuse TCP1.25A or Applications TCP2A is compliant with Telcordia GR1089 (lightning and AC power fault tests), Any sensitive equipment requiring protection ITU-T K20/K21 (lightning and AC power fault against lightning strikes and AC power faults. tests), TIA/EIA-IS-968 (formerly FCC Part 68 These devices are dedicated to central office lightning tests), and UL60950 (AC power fault protection as they comply with the most stressful tests). The use of the TCP1.25A allows the standards. Their low capacitances make them SMP100LC-xxx to be safe for the 2nd level (B suitable for xDSL. criteria) AC power fault tests. TM: Trisil is a trademark of STMicroelectronics February 2012 Doc ID 7050 Rev 14 1/13 www.st.com 13Characteristics SMP100LC 1 Characteristics Table 1. In compliance with the following standards Peak surge Required Minimum serial Waveform Current Standard voltage peak current resistor to meet voltage waveform (V) (A) standard () GR-1089 Core 2500 2/10 s 500 2/10 s 0 First level 1000 10/1000 s 100 10/1000 s 0 GR-1089 Core 5000 2/10 s 500 2/10 s 0 Second level GR-1089 Core 1500 2/10 s 100 2/10 s 0 Intra-building 6000 150 0 ITU-T-K20/K21 10/700 s 5/310 s 1500 37.5 0 ITU-T-K20 8000 ESD contact discharge 0 1/60 ns (IEC61000-4-2) 15000 ESD air discharge 0 4000 10/700 s 100 5/310 s 0 IEC61000-4-5 4000 1.2/50 s 100 8/20 s 0 TIA/EIA IS-968, 1500 10/160 s 200 10/160 s 0 lightning surge type A 800 10/560 s 100 10/560 s 0 TIA/EIA IS-968, 1000 9/720 s 25 5/320 s 0 lightning surge type B 2/13 Doc ID 7050 Rev 14