SPC5-CONNECT Programmable interface for PC communication to automotive target systems Data brief 5 V supply option for stand-alone operations Specification: Plastic Box size: 114 x 74 x 25 mm Description The SPC5 Connect is a programmable USB interface designed to connect a PC to development hardware or integrated modules via automotive communications channels such as CAN, SCI, LIN and K-Line. Based on the 32bit SPC563M64 microcontroller the SPC5 Connect offers from a PC via USB full Features access to the integrated microcontroller features USB connection to PC like I/O signals, analog channels, external interrupts input and automotive communication 2 CAN channels (1x ST L9616 CAN buses such as CAN, UART,K-Line, LIN and SPI. transceiver) The hardware features, also accessible through 1 LIN (transceiver, multiplexed from SCI) the Script Engine firmware, makes the SPC5 1 UART (STRS232 transceiver, multiplexed Connect a powerful, low cost and easy to use tool from SCI) for rapid development of small scripts in lab 1 Kline (ST L9637D transceiver, multiplexed applications. from SCI) The included extension flat cable with the 14 pin 18 GPIOs (6 eMIOS) header connector and the DB9 connector makes possible to easily connect a daughter board or 4 ADC channels wrapping board for a specific application. 2 SPI with 6 Chip Select (shared with GPIO) SPC5 Connect is supported by a specific set of 1 NMI software tools which allows easy programming of 3 LEDs (one power on LED controllable via the device together with basic control and software) monitoring features of target signals. The Reset control software application has been designed by STMicroelectronics experts. Integrated automotive microcontroller SPC563M64 Table 1. Device summary Flat cable with connectors included: Order code Reference 14 pin header connector DB9 connector for CAN/UART SPC5-CONNECT SPC5 Connect hardware Extended features (on board): Two header connectors for easy signals access JTAG 14pin header connector September 2013 DocID025205 Rev 2 1/4 For further information contact your local STMicroelectronics sales office. www.st.comSystem requirements, HW and SW resources SPC5-CONNECT 1 System requirements, HW and SW resources 1.1 System requirements Windows PC (XP, Vista, 7) 1.2 Development toolchains Green Hills MULTI Wind River diab PLS UADx/UDE Lauterbach Trace 32 iSystem IC3000/5000 1.3 Demonstration software The latest versions of support software can be obtained from www.st.com. 1.4 Package contents The content of package consists of: SPC5 Connect hardware USB cable (USB A to USB mini) Flat cable with one DB9 connector and one 14 pin header Mini CD-ROM with documentation 2/4 DocID025205 Rev 2