STLQ020J18R STMicroelectronics

STLQ020 Datasheet 200 mA ultra-low quiescent current LDO Features Operating input voltage range: 2 V to 5.5 V Output current up to 200 mA Flip-Chip4 DFN6-2x2 Ultra-low quiescent current: 300 nA typ. at no load 100 A typ. at 200 mA load SOT323-5L Controlled I in dropout conditions q Very low-dropout voltage: 160 mV at 200 mA Output voltage accuracy: 2% at room temperature, 3% in full temperature range Output voltage versions: from 0.8 V to 4.5 V, with 50 mV step and adjustable Logic-controlled electronic shutdown Output discharge feature (optional) Internal overcurrent and thermal protections Temperature range: from -40 C to +125 C Packages: DFN6-2x2, SOT323-5L, Flip-Chip4 Applications Smartphones/tablets Image sensors Wearable accessories Healthcare devices Maturity status link Metering STLQ020 Description The STLQ020 is a 200 mA low-dropout voltage regulator, able to work with an input voltage ranging from 2 V to 5.5 V. The typical dropout voltage at maximum load is 160 mV. The ultra-low quiescent current, which is just 0.3 A at no load, extends battery-life of applications requiring very long standby time. Even though the device intrinsic consumption is ultra-low, STLQ020 is able to provide fast transient response and good PSRR performance, thanks to its adaptive biasing circuit. Enable pin puts the STLQ020 in shutdown mode, reducing total current consumption to 5 nA. The STLQ020 is designed to keep the quiescent current under control and at a low value also during dropout operation, helping to extend even more the operating time of battery- powered devices. It also includes short-circuit constant-current limiting and thermal protection. Several small package options are available. DS12072 - Rev 4 - October 2021 www.st.com For further information contact your local STMicroelectronics sales office.STLQ020 Block diagram 1 Block diagram Figure 1. Block diagram (fixed version) Figure 2. Block diagram (adjustable version) V IN V OUT Bias generator OPAMP EN Enable Thermal protection ADJ Bandgap reference * GND Note: (*) output discharge function is optional. DS12072 - Rev 4 page 2/31