STM32373C-EVAL Evaluation board for STM32F373xx microcontrollers Data brief RS-232 communication configurable for communication of Flash loader IrDA transceiver 240x320 TFT color LCD connected to SPI interface Joystick with 4-direction control and selector Reset, Wakeup or Tamper, and Key buttons 4 color user LEDs 2 LEDs for MCU power range indicator ECG, pressure sensor and PT100 temperature sensor connected to the 16-bit Sigma Delta ADC of STM32F373VCT6 Extension connectors for daughter board or wrapping board MCU voltage: 3.3 V or adjustable 2.0 V - 3.6 V USB FS connector Touch slider RTC with backup battery CAN 2.0 A/B compliant connection Light dependent resistor (LDR) Two HDMI connectors with DDC and CEC IR transmitter and receiver Features Two ADC & DAC input and output signal STM32F373VCT6 microcontroller connectors and one Sigma Delta ADC input signal connector Four 5 V power supply options: Power jack Potentiometer ST-LINK/V2 USB connector JTAG/SWD and ETM trace debug support User USB connector Embedded ST-LINK/V2 Daughter board 2 Audio jack connected to I S DAC Microphone connected to ADC through an amplifier 2-GByte (or more) MicroSD card on SPI 2 Three components on I C bus: temperature sensor, EEPROM and dual interface RF EEPROM September 2014 DocID023608 Rev 3 1/3 For further information contact your local STMicroelectronics sales office. www.st.comDescription STM32373C-EVAL Description The STM32373C-EVAL evaluation board is designed as a complete demonstration and development platform for STMicroelectronics ARM Cortex-M4 core-based 2 STM32F373VCT6 microcontroller. It features two I Cs, three SPIs, three USARTs, one CAN, one CEC controller, one 12-bit ADC, three 16-bit sigma delta ADCs, three 12-bit DACs, internal 32-KByte SRAM and 256-KByte Flash, touch sensing slider, USB FS, and JTAG debugging support. This evaluation board can be used as a reference design for user application development but it is not considered as the final application. The full range of hardware features on the board can help the user evaluate all peripherals (USB FS, USART, audio DAC, microphone ADC, dot-matrix LCD, IrDA, LDR, MicroSD card, HDMI CEC, ECG, pressure sensor, CAN, IR transmitter and receiver, EEPROM, touch slider, temperature sensor, etc.) and develop their own applications. Extension headers make it possible to easily connect a daughter board or wrapping board for a specific application. An ST-LINK/V2 is integrated on the board as an embedded in-circuit debugger and programmer for the STM32 MCU. The STM32373C-EVAL evaluation board does not support STM32F3x8 MCUs (1.65 V to 1.95 V power supply). Ordering information To order the evaluation board for STM32F373xx microcontrollers, use the STM32373C-EVAL order code. Revision history Table 1. Document revision history Date Revision Changes 03-Sep-2012 1 Initial release. Modified title and added Ordering information. 11-Mar-2013 2 Added information on STM32F383xx MCUs in Description. 09-Sep-2014 3 Replaced STM32F383xx MCUs by STM32F3x8 MCUs 2/3 DocID023608 Rev 3