STM8T143-EVAL STMicroelectronics

STM8T143-EVAL STM8T143-EVAL evaluation board Data brief Data Streaming board connected to the ST- Features TSLINK probe driven by the STM-STUDIO Main board with an STM8T143AM62 software microcontroller in an SO8 package Power supply via USB or from ST-TSLINK 5 electrode boards with different ground probe planes: 2 LEDs (depending on Option Bytes Square electrode with no ground plane configuration) Square electrode with 15% ground plane LD1 (red) for proximity/touch detection Square electrode with 100% ground plane LD2 (green) for proximity detection Square electrode with ground ring and Jumper JP1 (IDD) for consumption plane measurement Ring electrode with no ground plane Proximity or touch or dual output depending on Description STM8T143 configuration The STM8T143-EVAL evaluation board is a Configuration through the one-time complete demonstration and development programmable option bytes with the platform for the STM8T143 touch and proximity Programming and Data Streaming board capacitive sensors. It includes a main board with connected to the ST-TSLINK probe driven by an STM8T143AM62, a programming and data the STVP - ST Visual Programmer software streaming board and 5 electrode boards with Monitoring of the STM8T143 internal different ground planes. capacitive sensing parameters in Data Streaming mode with the Programming and Figure 1. STM8T143-EVAL evaluation board May 2012 Doc ID 023046 Rev 1 1/3 For further information contact your local STMicroelectronics sales office. www.st.com 3STM8T143-EVAL Revision history Table 1. Document revision history Date Revision Changes 25-May-2012 1 Initial release. 2/3 Doc ID 023046 Rev 1