TS94x, TS94xA, TS94xB Output rail-to-rail micropower operational amplifiers Features TS941ILT Rail-to-rail output voltage swing Micropower consumption (1.2 A) Single supply operation (2.5 V to 10 V) CMOS inputs Ultra low input bias current (1 pA) ESD protection (2 kV) TS941ID-TS941IDT Latch-up immunity (class A) Available in SOT23-5 micropackage Applications Battery-powered systems (alarm) TS942ID-TS942IDT-TS942IPT Portable communication systems (pagers) Smoke/gas/fire detectors Instrumentation and sensoring PH meter Description TS944ID-TS944IDT-TS944IPT The TS94x (single, dual and quad) series are operational amplifiers characterized for 2.5 V to 10 V operation over a -40 C to +85 C temperature range. They exhibit excellent consumption -1.2 A, while featuring 10 kHz gain bandwidth product, 1.5 mA output capability and output rail-to-rail operation - 2.85 V typical at 3 V with R =10 k. L The TS94x op-amps are ideal for battery-powered systems, where very low supply current and Table 1. Device summary output rail-to-rail are required. Their very low - 1 pA typical input bias current and constant Reference Selection on offset voltage supply current over supply voltage enhance the TS94x TS941, TS942, TS944 devices performance near the end of the battery charge or battery life. TS94xA TS941A, TS942A, TS944A TS94xB TS941B, TS942B, TS944B October 2009 Doc ID 6972 Rev 6 1/18 www.st.com 18Absolute maximum ratings and operating conditions TS94x, TS94xA, TS94xB 1 Absolute maximum ratings and operating conditions Table 2. Absolute maximum ratings Symbol Parameter Value Unit (1) V Supply voltage 12 V CC (2) V Differential input voltage V V id CC (3) V Input voltage range V -0.3 to V +0.3 V in DD CC T Storage temperature range -65 to +150 C stg T Maximum junction temperature 150 C j (4) Thermal resistance junction to ambient SOT23-5 250 SO-8 125 R C/W thja SO-14 103 TSSOP8 120 TSSOP14 100 (4) Thermal resistance junction to case SOT23-5 81 SO-8 40 R C/W thjc SO-14 31 TSSOP8 37 TSSOP14 32 (5) HBM: human body model 2kV (6) MM: machine model (TS941, TS942) 200 V ESD (7) CDM: charged device model kV TS941 - TS944IDT 1.5 TS942 - TS944IPT 1 Latch-up immunity 200 mA Lead temperature (soldering, 10sec) 250 C 1. All voltage values, except differential voltage are with respect to network terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. The magnitude of input and output voltages must never exceed V +0.3 V. CC 4. Short-circuits can cause excessive heating and destructive dissipation. R are typical values. th 5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5 k resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 ). This is done for all couples of connected pin combinations while the other pins are floating. 7. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins. 2/18 Doc ID 6972 Rev 6