TSV911IYLT STMicroelectronics

TSV91x, TSV91xA Datasheet Single, dual, and quad rail-to-rail input/output 8 MHz operational amplifiers Features TSV911 Rail-to-rail input and output Wide bandwidth Low power consumption: 820 A typ. SOT23-5 SO8 Unity gain stability High output current: 35 mA TSV912 Operating from 2.5 V to 5.5 V Low input bias current, 1 pA typ. Low input offset voltage: 1.5 mV max. (A grade) ESD internal protection 5 kV DFN8 2x2 MiniSO8 SO8 Latch-up immunity TSV914 Applications Battery-powered applications Portable devices Signal conditioning TSSOP14 SO14 Active filtering Medical instrumentation Automotive applications Product status link Description TSV911, TSV911A, TSV912, TSV912A, The TSV91x and TSV91xA operational amplifiers (op amps) offer low voltage TSV914, TSV914A operation and rail-to-rail input and output, as well as an excellent speed/power consumption ratio, providing an 8 MHz gain-bandwidth product while consuming only Related products 1.1 mA maximum at 5 V. The op amps are unity gain stable and feature an ultra-low input bias current. See TSV991, TSV992, TSV994 The devices are ideal for sensor interfaces, battery-supplied and portable and TSV991A, for higher speed applications, as well as active filtering. TSV992A, TSV994A DS4899 - Rev 12 - November 2019 www.st.com For further information contact your local STMicroelectronics sales office.TSV91x, TSV91xA Package pin connections 1 Package pin connections Figure 1. Pin connections for each package (top view) SOT23-5 OUT 1 5 VCC+ OUT 1 5 VCC- VCC- 2 VCC+ 2 IN+ 3 4 IN- IN+ 3 4 IN- TSV911ILT TSV911RILT SO8 (single) NC NC 1 8 In1- 2 - 7 VCC+ + In1+ 3 6 Out VCC- NC 4 5 MiniSO8, SO8, DFN8 2x2 (dual) Out1 1 8 VCC+ In1- 2 - 7 Out2 + - In1+ 3 6 In2- + VCC- 4 5 In2+ SO14, TSSOP14 Out1 1 14 Out4 - - In1- 2 13 In4- In1+ 3 + + 12 In4+ VCC+ 4 11 VCC- In2+ 5 + + 10 In3+ In2- 6 9 In3- - - Out2 7 8 Out3 - 1. The exposed pad of the DFN8 2x2 package is not internally connected and can be set to V or left CC floating. DS4899 - Rev 12 page 2/28