VND5050KTR-E STMicroelectronics

VND5050J-E VND5050K-E Double channel high side driver for automotive applications Features Max supply voltage V 41 V CC Operating voltage range V 4.5 to 36 V CC Max on-State resistance (per ch.) R 50 m ON PowerSSO-12 PowerSSO-24 Current limitation (typ) I 18 A LIMH Reverse battery protection (see Figure 28) (1) Off-state supply current I 2A S Electrostatic discharge protection 1. Typical value with all loads connected. Applications Main All types of resistive, inductive and capacitive Inrush current active management by loads power limitation Very low standby current Description 3.0 V CMOS compatible input The VND5050K-E and VND5050J-E are Optimized electromagnetic emission monolithic devices made using Very low electromagnetic susceptibility STMicroelectronics VIPower M0-5 technology. In compliance with the 2002/95/EC they are intended for driving resistive or inductive European directive loads with one side connected to ground. Active Diagnostic functions V pin voltage clamp protects the devices CC against low energy spikes (see ISO7637 transient Open drain status output compatibility table). The devices detect open load On-state open load detection condition both in on and off-state, when Off-state open load detection STAT DIS is left open or driven low. Output Thermal shutdown indication shorted to V is detected in the off-state. CC Protections When STAT DIS is driven high, STATUS pin is in Undervoltage shutdown high impedance state. Overvoltage clamp Output current limitation protects the devices in Output stuck to V detection CC overload condition. In case of long overload Load current limitation duration, the devices limit the dissipated power to Self limiting of fast thermal transients a safe level up to thermal shutdown intervention. Protection against loss of ground and loss Thermal shutdown with automatic restart allows of V the devices to recover normal operation as soon CC as fault conditions disappear. Thermal shutdown Table 1. Device summary Order code Package Tube Tape and reel PowerSSO-12 VND5050J-E VND5050JTR-E PowerSSO-24 VND5050K-E VND5050KTR-E September 2013 Doc ID 12266 Rev 7 1/37 www.st.com 1 Contents VND5050J-E / VND5050K-E Contents 1 Block diagram and pin description . 5 2 Electrical specifications 7 2.1 Absolute maximum ratings . 7 2.2 Thermal data . 8 2.3 Electrical characteristics . 8 2.4 Electrical characteristics curves 16 3 Application information . 20 3.1 GND protection network against reverse battery . 20 3.1.1 Solution 1: resistor in the ground line (RGND only) 20 3.1.2 Solution 2: a diode (DGND) in the ground line . 21 3.2 Load dump protection 21 3.3 Microcontroller I/Os protection . 21 3.4 Open-load detection in off-state 21 3.5 Maximum demagnetization energy (VCC = 13.5V) . 23 4 Package and PCB thermal data . 24 4.1 PowerSSO-12 thermal data . 24 4.2 PowerSSO-24 thermal data . 27 5 Package and packing information . 30 5.1 ECOPACK packages . 30 5.2 PowerSSO-12 package information . 30 5.3 PowerSSO-24 package information . 32 5.4 PowerSSO-12 packing information 34 5.5 PowerSSO-24 packing information 35 6 Revision history . 36 2/37 Doc ID 12266 Rev 7