X-NUCLEO-NFC01A1 STMicroelectronics

X-NUCLEO-NFC01A1 Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo Data brief Powered through the Arduino UNO R3 connectors 3 color LEDs for general purpose Description The X-NUCLEO-NFC01A1 is a Dynamic NFC tag evaluation board to allow expansion of the STM32 Nucleo boards. It is compatible with the Arduino UNO R3 connector layout and it is designed around the M24SR64-Y. The M24SR64-Y device is a dynamic NFC/RFID tag IC with a dual Features interface. It embeds a 64 Kbit EEPROM memory. 2 It can be operated from an I C interface or by a M24SR64-Y Dynamic NFC/RFID tag IC 13.56 MHz RFID reader or a NFC phone. NFC antenna: 31 mm x 30 mm 13.56 MHz The board is powered through the Arduino UNO double layer inductive antenna etched on the R3 connectors. It also includes three LEDs for PCB (ANT14) general purpose. Compatible with STM32 Nucleo boards Equipped with Arduino UNO R3 connector Figure 1. Functional block diagram UGXLQR FRQQHFWRU UGXLQR FRQQHFWRU 1XFOHR SRZHU VXSSO 5) GLVDEOH DQWHQQD ORRS *32 0 65 , & ,QWHUUXSW OLQN UGXLQR FRQQHFWRU UGXLQR FRQQHFWRU 06 9 June 2014 DocID026510 Rev 1 1/3 For further information contact your local STMicroelectronics sales office. www.st.comRevision history X-NUCLEO-NFC01A1 1 Revision history Table 1. Document revision history Date Revision Changes 19-Jun-2014 1 Initial release. 2/3 DocID026510 Rev 1