SCA15505-01 Stop-Choc

STOP-CHOC S.L.F. MOUNTS Natural Frequency : 10 to 25 Hz SMALL LOADS / HIGH DEFLECTIONS DESCRIPTION Low frequency high deflection anti-vibration mounting available in a choice of elastomers including high damped silicone. The zinc plated mild steel metalwork is fully bonded for improved fatigue strength. APPLICATIONS These mounts have been designed to protect low mass components and instruments from vibration and shock and to isolate small rotating machines e.g. pumps and electric motors. DIMENSIONS SCA 15507 Shear Roll Compression weight : 6 g approx OPERATING CHARACTERISTICS Maximum sinusoidal input at resonance : 0.5 mm Resonance frequencies at maximum input : 10 to 25 Hz dependent on axis Axial to radial stiffness : 3 : 1 Maximum displacement during shock : axial : 5 mm radial : 7 mm Mechanical strength corresponding to a continuous acceleration of 10 g at maximum load PART Static load daN Static load daN Static load daN Amplification Temperature for NUMBER compression shear roll at resonance continuous operation SCA 1550* S42 0.10 - 0.50 0.10 - 0.25 0.10 0.15 4 - 54 to + 150 C SCA 1550* S72 0.60 - 0.80 0.25 - 0.50 0.15 0.30 SCA 1550* - 01 0.10 - 1.50 0.10 - 0.50 0.10 0.40 10 - 40 to + 70 C SCA 1550* - 02 1.50 - 3.00 0.50 - 1.00 0.40 0.80 NB : The * define the type of fixing : combination fixing SCA15507 male/male fixings : SCA15505 female/female fixings: SCA15506 ASSEMBLY Improved stability can be achieved if the mounts are inclined at 45 towards the centre of gravity Banbury avenue, Slough Berkshire SL1 4LR, England STOP-CHOC Tel : 01753 533 223 Fax : 01753 693 724 E-mail : sales stop-choc.co.uk X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Stop-Choc manufacturer: Other Similar products are found below : Stop-Choc