Tooling intro Overview TRIM TRIO tooling Crimptooling for TRIM TRIO contacts The TRIM TRIO connection system not only offers versatility in connectors but production versatility in tooling as well. All information needed on tooling ranges from simple handtools for small production, over semi-automatic to full automatic strip-and-crimp machines can be found on the hereafter paragraphs. All the TRIM TRIO tooling and this for machined, stamped and formed and coax contacts, is specially designed for this system to make reliable, trouble-free connections. 141Tooling Crimptooling for Size 16 contacts ( 1,6 mm) For an overview on crimptooling refer to crimptooling tables at the different contact sections. Weight: 425 gr. Weight: 400 gr. Length: 250 mm. Length: 205 mm. M10S1 - for machined contacts Y16RCM - for machined contacts A robust, versatile, full cycling handtool which is fully qualified to the A light weight, low cost crimptool with fixed, 3-groove die set to requirements of MIL-C-22520. Interchangeable 4-indent die sets crimp Size 16 TRIM TRIO RM/RC loose piece machined are available for a wide range of machined contacts and gives a contacts. simultaneous crimp on both wire and insulation. The tool is ratchet controlled to guarantee a complete crimp cycle. This tool is suitable for application of RM/RC machined Each crimptool is supplied with a locator to guarantee a perfect contacts and coaxial from the TRIM TRIO range. crimp indent positioning. Weight: 300 gr. Weight: 425 gr. Length: 170 mm. Length: 250 mm. MH860 - for machined contacts AF8 - for machined contacts A light weight crimptool Qualified to MIL-C-22520/7 that gives Qualified to MIL-C-22520/1, has virtually limitless application an 8 impression crimp with a precision cycle-controlled ratcheting within the specified wire range of 12 through 26 AWG. It gives an mechanism. It features an 8 step crimp-depth selector knob and 8 impression crimp with a precision cycle-controlled ratcheting is designed to crimp Size 16 TRIM TRIO RM/RC loose piece mechanism and is used for certain machined power machined contacts. The tool can be provided with different contacts and certain coax contacts. The tool can be provided locators heads to crimp different contact types. with different locators turret heads to crimp different contact types. 142