8599-1006 Sunbank

8STA Series Hermetic Feed-through Solder Contacts on Both Sides of Bulkhead Designed for high vibration environment. Wire soldered on both sides of the feed-through: no plugs needed. Cost and space saving Adapted to space-constrained area. No plugs necessary. Easy to solder Contacts fully tin plated. Different contact sizes available. -7 3 High performance sealing <1.10 atm.cm /s. Heat shrink boot version AM44 connector with specific shell: Specific shell development on demand, please consult us. 8STA Series Hermetic Feedthrough Description Solder contacts on both sides of bulkhead Designed for high vibration environment Wire soldered on both sides of the feed-through: no plugs needed Cost and space saving: . Adapted to space-constrained area . No plugs necessary Easy to solder: . Contacts fully tin plated . Different contact sizes available -7 3 High performance sealing: <1.10 atm.cm /s Technical features Mechanical Electrical Environmental Test voltage: Service M: 1300V Operating temperature: Shell: Stainless steel -55C to +175C Contact resistance: 2 m Shell plating: Passivated Sealing mated connectors: Insultation resitance: IP67 (1 meter for 30 min minimum) Insulator: Glass bead 5000M (at 500Vdc) Salt spray: 48 hours Contact: Nickel iron, tin plated Contact rating: Size 22D: 3 A -7 3 Hermeticity: 1.10 cm /s Contact layouts (viewed from front face of male insulator) 12 35 22 22D Service M Consult us for other layouts or shell sizes. 2