D3899932W17R Sunbank

8D - D38999 Aluminium Series MIL-DTL 38999 Serie III MIL-DTL 38999 Series III Aluminium Series Aluminium Series 138D - D38999 Aluminum Serie Connector part numbers Basic Series 8D 0 - 11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding. Type: -: Connectors with standard crimp contacts. L: Receptacle with long spill (male and female size #22D, #20). C: Receptacle with short spill (male and female #22D, #20, #16). S: Receptacle with specific spill (male et female #22D) W: Receptacle with male contacts #22D for wire wrap (3 wraps) T: Receptacle with male contacts #20 for wire wrap (2 wraps) Shell size: 09 - 11 - 13 - 15 - 17 - 19 - 21 - 23 - 25 Plating: W: Olive drab cadmium F: Nickel ZC: Green zinc cobalt Z: Black zinc nickel Contact layout: See page 8 to 11 Contact type: P: Pin. A: Connector supplied less pin contact or with specific contacts (connector marking: A + orientation). S: Socket. B: Connector supplied less socket contact or with specific contacts (connector marking: B + orientation). Orientation: N, A, B, C, D & E (see page 58) Specification: 046: Tinned straight spills 251: Connector provided with power contacts (layouts with contact #8) 022: Fuel tank L: For P or S contact type only, connectors delivered without contacts, connectors marking P or S plus orientation. MIL-DTL-38999 part numbers* Basic Series D38999 20 W B 35 P N L Shell style: 20: Square flange receptacle 24: Jam nut receptacle 26: Plug with RFI shielding. Plating: W: Olive drab cadmium F: Nickel Shell size: A - B - C - D - E - F - G - H - J Contact layout: See page 11 for layout according to MIL-DTL-38999 Contact type: P: Pin. A: Connector supplied less pin contact or with specific contacts (connector marking: A + orientation). S: Socket. B: Connector supplied less socket contact or with specific contacts (connector marking: B + orientation). Orientation: N, A, B, C, D & E (see page 58) L: For P or S contact type only, connector delevired without contacts, connector marking P or S (without L) * Note: To place an order of MIL connectors delivered without MIL removable crimp contacts and keep P or S plus orientation marking, it must be specify clearly on the order (by adding a suffix L at the end of the P/N or specified in comment). 18