ETH1-1101A Sunbank

Copper Technology Quadrax Contact 1 - DESCRIPTION Four 24 pin contacts with 360 shielding Compact design allows mounting into 8 cavity dimensions Replaces the use of 2 twinax contacts with 30% shorter cabling time and better performance Front and rear removable versions available Crimp and PC tail versions available Key features Crimped signal contacts, crimped 8 body Standard 8 cavity insertion and removal tools Ground connection of the cable braid to the shell possible through the external shell of the 8 contacts Compatible with star quad cable and twinax cable Characteristic impedance of 100 or 150 Operating temperature: - 65C/+200C. Indexing Key (45) Pin to crimp Socket to crimp PC Tail Pin 3 Copper TechnologyCopper Technology Quadrax Contact 2 - TECHNICAL CHARACTERISTICS Mechanical Material Inner contact: copper alloy Endurance: minimum 500 mating / unmating operations in Body: copper alloy any connector Insulator: thermoplastic Shocks: 300 g, 3 ms as per EN-2591-6404 method A and MIL-STD 1344 in 38999 connector Contact plating: gold over nickel plated Vibrations: Random 100 to 1000 Hz, 3 x 8 hours 2 0.2 g /Hz, as per MIL-STD 1344 A, Method 2005.1, level E, test V, in ARINC 600 connector Electrical performances 2 Random, 3 x hours 0.2 g /Hz, as per EN-2591-6403 Method B, level J in 38999 connector Contact resistance (low level): initial 15 m, after tests 30 m Contact retention: minimum 155 N Contact resistance at rated current: Contact insertion force: maximum 11 N Max contact resistance (m) Environmental 23 C 200 C Salt spray: 48 hours minimum, as per MIL-STD 1344 A, Contact Rated Initial After tests After tests method 1003 current (A) Temperature range: -65 C, +200 C Signal 1 15 30 45 Sealing in connector insert (for sealed Quadrax version): contacts Altitude immersion 2 kPa in accordance with EN 2591-6303 table 7 and MIL-STD 1344 Outer body 12 3 4 6 IP 68 Dielectric withstanding voltage: Sea level = 500 Vrms between signal contacts and signal contact/body 21000 m = 125 Vrms between signal contacts and signal contact/body Insulation resistance: at ambient temperature > 5000 M, at high temperature > 1000 M Characteristic impedance: 100 100 MHz Attenuation 0.3 dB 100 MHz typical per contact pair (cat 5E requirement = 0.3 dB 100 MHz) Crosstalk 40 dB 100 MHz typical (cat 5E requirement = 40 dB) 4