MS3116F8-3P Sunbank

8 7 6 5 4 3 2 1 2 3 5 4 5 4 4 4 3 3 HS2 P 5 M 20 - BPEK 2 1 6 3 6 3 4 2 3 2 HS2 Series Options: 5 2 5 2 K - Kit Packaging (one unit/bag) 2 2 Connector Type: 7 7 [blank] - Bulk Packaging P - Panel 3 B - Rear Panel-mount 4 5 1 1 1 1 1 6 6 8 8 1 1 F F 7 9 P - PC Contacts, straight tails COUNTERCLOCKWISE COUNT E - Epoxy seal FEMALE (SOCKET) CONTACT ARRANGEMENTS REAR (WIRING SIDE) VIEW # of contacts: 2-5 for #20 6-9 for #26 2 3 4 5 4 5 3 3 4 4 Gender: Contact Size: 1 2 3 6 3 6 2 3 2 4 M - Male (Pin) 20 - 20, 22, 24, 26 AWG wires 2 5 2 5 F - Female (Socket) 26 - 26,28, 30 AWG wires 2 7 2 7 Refer to HS2C SERIES drawing for mating Cable-End connectors. 1 1 1 5 4 3 1 6 1 6 1 1 8 8 7 9 CLOCKWISE SPECIFICATIONS: MALE (PIN) CONTACT ARRANGEMENTS COUNT MECHANICAL REAR (WIRING SIDE) VIEW Mating / Locking Type: Push-Pull automatic locking/unlocking E E Life 5,000 cycles minimum Operating Forces 10 lb. [44.5 N] maximum Insertion or Withdrawal Vibration Mil-Std 202G Method 201A Panel-Mount Hex Nut Tongue 40 in-lb [4.5 Nm] maximum PANEL MOUNTING HEX NUT Cable Securing System: Threaded on metal Clamp ELECTRICAL Voltage Rating 125 V AC/DC for 2-5 contact arrangements 30 V AC/DC for 6-9 contact arrangements PANEL SEAL O-RING Current Rating Refer to Current Carry Capacity Table Insulation Resistance 1000 M minimum Contact Resistance 10 m typical EMI Shielding 360 ENVIRONMENTAL PC REAR PANEL-MOUNT Temperature Limits -40C to +135C (-40F to +275F) HS2 SERIES CONNECTOR Operating Temperature Range Refer to Current Carry Capacity Table Moisture Resistance Mil-Std 202G Method 106G D D Insulation Resistance Mil-Std 202G Method 302 Thermal Shock Mil-Std 202G Method 107G Salt Atmosphere (Corrosion) Mil-Std 202G Method 101E Ingress Protection Ratings IP66, IP67, IP68 (6 ft. for 24 hours) per IEC60529, NEMA 250 6P MATERIAL Outer Shell Metal components Copper Alloy, electroless nickel plated Hex Nut & Inner Metal components Copper Alloy, nickel plated Ground Spring Washer Stainless Steel Electrical Insulator Medical Technology LCP, natural Seal O-rings Silicone, red Contacts Copper Alloy, gold plated with Stainless Steel locking clip HS2P5M20-BPE SHOWN HERE Epoxy Silicone Potting Compound Minimum Voltage C C Wire Current Rating (A) at Operating Temperature (C) Test (V rms) Contacts (awg) Voltage tested per +0.004 (V rms) UL2238 0.67 45C max. 65C max. 85C max. 100C max. 110C max. 0.496 0.71 0.28 0.44 -0.000 20 10 9 8 7* 6 17.0 18.0 +0.10 7.0 11.0 22 8.5 7.5 7.5 5.5* 4.5 12.60 ACROSS FLATS 2 #20 0.00 24 7 6 5 4.5* 3.5 M14x1.0 THREAD 26 4 4 3.5 3.5* 2.5 +0.004 20 9.5 8.5 7.5 6.5* 5 0.555 -0.000 22 8 7 6 5* 4 3 #20 +0.10 24 6 5.5 4.5 4* 3 14.10 0.00 26 3.5 3.5 3 3* 2.5 1400 125 20 9 8 7 6* 5 22 7.5 6.5 5.5 4.5* 3.5 4 #20 24 5 4.5 4 3.5* 2.5 0.43 0.75 26 3 3 2.5 2.5* 2 10.9 19.0 20 8 7.5 6.5 5.5* 4.5 22 6.5 5.5 5 4* 3 5 #20 24 4.5 4 3.5 3* 2.5 B B 26 2.5 2.5 2 2* 1.5 26 2.5 2.5 2 2* 1.5 0.1250.010 TYP 6-7 #26 28 2 2 1.5 1.5* 1 3.180.25 30 1.5 1.5 1 1* .5 1000 30 26 2 2 1.5 1.5* 1 RECOMMENDED PANEL CUT-OUT 8-9 #26 28 1.5 1.5 1 1* .5 HS2P5M20-BPE SHOWN HERE 30 1 1 .5 .5* .5 0.17 MAX PANEL THICKNESS EPOXY (OPTIONAL) *Temperature Rise does not exceed 30C when tested according to UL2238. All other recommended current 4.3 ratings are based on the Relative Thermal Index of the insulating material. ALL DIMENSIONS FOR REFERENCE ONLY CUSTOMER DRAWING THIS DRAWING DESCRIBES A DESIGN CONSIDERED PROPRIETARY IN NATURE, DEVELOPED AND MANUFACTURED BY SWITCHCRAFT INC. AND IS RELEASED ON A CONFIDENTIAL BASIS FOR IDENTIFICATION PURPOSES ONLY. SIZE WIDTH MULT LBS/M TEMPER UNLESS OTHERWISE SPECIFIED FINISH MATERIAL 1. ALL DIMENSIONS IN INCHES [mm] A A SPEC No. SPEC No. - TWO PLACE DECIMALS 0.02 [0.5] SCALE FIRST USED ON - THREE PLACE DECIMALS 0.005 [0.13] 3:1 DATE DRAWN BY CHKD APVD SRC PNK 11/09/16 PNK 0A PRELIMINARY 11/09/16 PNK SRC SHEET OF 11/09/16 1 2 11/09/16 NAME PART No. REV REV ECO NUMBER DATE BY APVD PC, REAR PANEL-MOUNT HS2P_-BPE SERIES HS2 SERIES CONNECTOR, RoHS REVISIONS DO NOT SCALE DRAWING 0A 8 7 6 5 4 C SolidWorks CAD File8 7 6 5 4 3 2 1 3X 0.0460.001 0.1560.001 5X 0.0460.001 0.1560.001 1.170.03 3.960.03 1.170.03 3.960.03 0.148 REF 144 F F 0.148 REF 3.77 3.77 0.1560.001 0.1560.001 0.0460.001 3.960.03 3.960.03 2X 0.0460.001 72 1.170.03 1.170.03 0.078 REF 1.98 0.063 REF 0.063 REF 0.063 REF 1.60 0.024 REF 1.60 1.60 0.024 REF 0.61 0.61 0.024 REF 0.61 72 0.148 REF 3X 72 5X 72 3.77 0.092 REF 0.092 REF 0.092 REF E E 2.33 2.33 2.33 2 - 5 #20 PIN ARRANGEMENTS #20 PC TAIL DIA.: 0.0390.001 RECOMMENDED PCB HOLE SIZE: 0.0460.001 [1.170.03] D D 8X 45 8X 45 6X 60 6X 60 8X 0.0260.001 9X 0.0260.001 22.5 22.5 6X 0.0260.001 7X 0.0260.001 0.660.03 0.660.03 30.0 30.0 REF REF 0.660.03 0.660.03 REF REF 0.1720.001 0.1720.001 4.370.03 4.370.03 0.1640.001 0.1640.001 4.170.03 4.170.03 0.033 REF 0.033 REF 0.84 0.84 C C 0.079 REF 0.079 REF 0.071 REF 0.071 REF 2.02 2.02 1.80 1.80 0.066 REF 0.066 REF 0.082 REF 1.67 0.082 REF 1.67 0.159 REF 2.08 2.08 0.159 REF 4.04 0.164 REF 4.04 0.164 REF 4.17 4.17 B B 6 - 9 #26 PIN ARRANGEMENTS #26 PC TAIL DIA.: 0.0200.001 RECOMMENDED PCB HOLE SIZE: 0.0260.001 [0.660.03] A A SCALE 8:1 DATE DRAWN 11/09/16 SHEET OF 2 2 PART No. REV DRAWN BY HS2P_-BPE SERIES PNK 0A 8 7 6 5 4 3 C SolidWorks CAD File