UT001619SH Sunbank

A B C D E F G H 8 7 6 5 4 3 2 1 A.8 Valid C Housing A MATERIAL : D E Housing : Zinc alloy nickel plated B O ring Insert : PA 66 UL94 V0 8 Mating gasket : sealing IP67:Nitril (specification 05 only) sealing IP68:Silicone Thread O ring : nitril Insert PERFORMANCE CHARACTERISTICS : Operating temperature : -40 C up to 105 C Insulation resistance : 5000 M min Withstanding voltage: 2000Vrms (1500 Vrms for 102w2 and 103w3 layouts) 7 Corrosion salt spray : 96 hours Durability : 500 matings and unmatings Sealing IP67 / IP68 3 bar/30min as per IEC60529 Sealing IP69K as per DIN40050 ROHS compliant NOTES : -1- Contact identification and orientation of connector, refer to: UT0-CONTACT-L-C01 (Male) F(4x) 6 G UT0-CONTACT-L-C02 (Female) Seal gasket -3- Contact to be ordered separately refer to : UT0 catalog -4- Dimension P for front panel mounting (see to panel cut out) -5- Dimension R for rear panel mounting (see to panel cut out) -6- To achieved Sealing condition : Add UTFD-- Sealing Gasket C Max Part Number Thread -7- Insert arrangement refer to : UT0-DHP-001-C01 (Male) A 0.3 B 0.2 D 0.2 E 0.35 F 0.15 G 0.2 (Note 8) (for information) Male Female UT0-DHP-002-C01 (Female) -8- This drawing covers p/n termination : -H / -H6 / -H05 / -H605 UT00102W2--H- 31.50 -9- Packaging: connector is individually packed in a plastic bag UT00103W3--H- 9/16-24 5 UT00103--H- 23.85 18.26 UNEF Class 2A UT00104--H- 33.20 25.50 UT001044--H- UT00 14 2G1 P W H6 05 UT00124--H- 11/16-24 26.20 20.62 Receptacle UT0 : Type 0 UNEF Class 2A UT00128--H- Shell size : UT00142G1--H- 36.00 32.50 11.35 1.60 25.50 UT00147--H- Insert arrangement : See Note 7 13/16-20 4 UT00148--H- 28.60 23.01 31.50 UNEF Class 2A 3.10 Contact : P : Male UT001412--H- S : Female 7.50 UT001492--H- Insert polarisation : No letter : Standard version 33.20 15/16-20 W, X, Y, Z : Differents orientation UT001619--H- 31.05 24.61 25.50 UNEF Class 2A Sealing version : H : IP67 version H6 : IP68 version 1 1/16-18 UT001823--H- 33.35 26.97 UNEF Class 2A Specification : No letter : Standard version 05 : O ring rear on the receptacle UT002028--H- 3 1 3/16-18 36.55 29.36 UNEF Class 2A UT002030--H- 14.55 UT002235--H- 1 5/16-18 39.80 31.75 34.70 29.30 2.40 UNEF Class 2A UT002238--H- 1 7/16-18 UT002448--H- 42.90 34.92 15.35 3.80 UNEF Class 2A CREATION OF THE DRAWING 20/04/2015 24021 A Cancel & replace UT00-C01 2 MALE CONNECTOR FEMALE CONNECTOR ISS DATE Latest modification - by: COUTY L. MOD N Designed by: COUTY L. Date : 20/04/2015 CUSTOMER DRAWING RECEPTACLE TITLE SOCKET (S) UT0 CONNECTOR PIN (P) Scale General linear NPRDS / PROJECT Tolerances: 2/1 0.1 UT0 This document is the property of SOURIAU 1 WWW.SOURIAU.COM It must not be reproduced or communicated without permission FORMAT SHEET SOURIAU DRG N 1 / 2 A2 C001-UT00-A H G F E D C B A CLASSIFICATION : NOT EXPORT CONTROLLED B AA B C D E F G H 8 7 6 5 4 3 2 1 A.8 Valid Panel Cut Out N(4x) 8 In case the connectors are equipped with dipsolder contacts P G 7 R CONTACT RM20M12E83x (Male) or RC20M12E83x (Female) 6 M Part Number M 0.2 N 0.1 P 0.1 R 0.1 UT00102W2--H- UT00103W3--H- UT00103--H- 18.26 3.20 14.20 17.30 UT00104--H- 5 UT001044--H- UT00124--H- 20.62 3.20 18.40 21.85 UT00128--H- UT00142G1--H- UT00147--H- Contacts to be ordered separately UT00148--H- 23.01 3.20 21.50 25.00 UT001412--H- 4 UT001492--H- MALE CONTACTS FEMALE CONTACTS UT001619--H- 24.61 3.20 24.60 28.10 G G Part Number Part Number UT001823--H- 26.97 3.20 27.80 31.35 min max min max UT002028--H- UT00104P-H- UT00104S-H- 29.36 3.20 30.95 34.50 UT002030--H- UT001044P-H- UT001044S-H- UT002235--H- 31.75 3.20 34.10 37.70 3 UT00128S-H- UT00124P-H- UT002238--H- UT002448--H- 34.92 3.90 37.30 40.90 UT00128P-H- UT001412S-H- 7.5 9.2 UT001412P-H- UT001492S-H- -Dimension P for front panel mounting (see to panel cut out) -Dimension R for rear panel mounting (see to panel cut out) UT001492P-H- UT001619S-H- UT001823S-H- UT001619P-H- 8.1 10.3 CREATION OF THE DRAWING 04/11/2014 24021 A UT001823P-H- UT002028S-H- Cancel & replace UT00-C01 2 ISS DATE Latest modification - by: COUTY L. MOD N UT002028P-H- UT002030S-H- Designed by: COUTY L. Date :04/11/2014 CUSTOMER DRAWING RECEPTACLE UT002030P-H- UT002235S-H- 5.3 7.1 TITLE UT0 CONNECTOR UT002235P-H- UT002238S-H- Scale General linear NPRDS / PROJECT Tolerances: UT002238P-H- UT002448S-H- 3/1 0.1 UT0 This document is the property of UT002448P-H- SOURIAU 1 WWW.SOURIAU.COM It must not be reproduced or communicated without permission FORMAT SHEET SOURIAU DRG N 2 / 2 A2 C001-UT00-A H G F E D C B A CLASSIFICATION : NOT EXPORT CONTROLLED M