Product Fact Sheet Industrial TM CFast Card F-50 Series SATA Gen3 - 6.0 Gbit/s, MLC Commercial and Industrial Temperature Grade Date: December 17, 2019 Revision: 1.06 Product Fact Sheet F-50 Series Product Summary Capacities: 8 GBytes, 16 GBytes, 32 GBytes, 64 GBytes, 128 GBytes, 256 GBytes TM Form Factor: CFast 2.0 (36.4 mm x 42.8 mm x 3.6 mm) Compliance: SATA Gen3 - 6 Gbit/s (Gen2 - 3 Gbit/s and Gen1 - 1.5 Gbit/s backward compatible) Command Sets: Supports ATA/ATAPI-8 and ACS-2 Performance: o Read Performance: Sequential Read up to 500 MBytes/s, Random Read 4K up to 53,500 IOPS o Write Performance: Sequential Write up to 330 MBytes/s, Random Write 4K up to 74,000 IOPS 1 Operating Temperature Range : o Commercial: 0 C to 70 C o Industrial: -40 C to 85 C Storage Temperature Range: -40 C to 85 C Operating Voltage: 3.3 V 5% Power (Max Capacity): Read (Active): 1.2 W Write (Active): 2.0 W Idle: 248 mW Slumber: 17 mW Data Retention: 10 Years Life Begin / 1 Year Life End 2 Endurance in TeraBytes Written (TBW) Max Capacity : Client 165 Enterprise 8 Shock/Vibration: 500 g / 20 g Hardware BCH Code ECC: up to 66 bit correction per 1 KByte page NAND Flash Technology: Multi-Level Cell (MLC) Mean Time Between Failure (MTBF): > 2,000,000 hours 16 Data Reliability: < 1 non-recoverable error per 10 bits read Product Features Dynamic and Static Wear Leveling Subpage Mode Flash Translation Layer (FTL) Active Data Care Management: Read Refresh Lifetime Enhancements o Dynamic Bad Block Remapping o Write Amplification Reduction On-Board Power Fail Protection AHCI, TRIM, and NCQ Support ATA Security Feature Set Support DEVSLP Compatible In-Field Firmware Update Enterprise-Grade Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) Controlled Locked BOM 30 inch Gold-Plated Connector (on request) Conformal coating (on request) Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request) Why Swissbit Swissbit is focused on the design, development, manufacture, and support of leading edge memory and storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, Swissbit recognizes and addressees the higher level of application requirements of todays industrial, Netcom, and automotive customers by providing best-in-class products and services, with uncompromised attention to driving overall value and quality. 1 Adequate airflow is required to ensure the temperature, as reported in the S.M.A.R.T. data, does not exceed 120C (industrial temperature drive) and 105C (commercial temperature drive) respectively. 2 According to JEDEC (JESD47I), the time to write the full TBW is a minimum of 18 months. Higher average daily data volume reduces the specified TBW. The values listed are estimates and are subject to change without notice. Swissbit AG Revision: 1.06 Industriestrasse 4 Doc-2791 CH-9552 Bronschhofen www.swissbit.com File: F-50 fact sheet Rev106 Switzerland industrial swissbit.com Page 2 of 2