Product Fact Sheet Industrial M.2 PCIe SSD N-10m2 2280 Series PCIe 3.1, 3D TLC Commercial and Industrial Temperature Grade Date: July 29, 2019 Revision: 1.00 Product Fact Sheet N-10m2 2280 Series Product Summary Capacities: 120 GBytes, 240 GBytes, 480 GBytes, 960 GBytes Form Factor: PCI Express M.2 2280 (80 mm x 22 mm x 2.23 mm) Compliance: PCI Express Specification Revision 3.1 Interface: Gen3 x 2 Lanes o Drive operates in x1 mode in x1 M.2 PCIe slots o Drive operates in x2 mode in x2 or x4 M.2 PCIe slots Command Sets: Supports NVMe 1.2 Performance: o Read Performance: Sequential Read up to 1,600 MBytes/s, Random Read 4K up to 190,000 IOPS o Write Performance: Sequential Write up to 1,000 MBytes/s, Random Write 4K up to 190,000 IOPS * Operating Temperature Range : Commercial: 0 C to 70 C and Industrial: -40 C to 85 C Storage Temperature Range: -40 C to 85 C Operating Voltage: 3.3 V 5% Low Power Consumption Data Retention: 10 Years Life Begin 1 Year Life End Endurance in TeraBytes Written (TBW) Max Capacity : Client 2280 Enterprise 290 Shock/Vibration: 1,500 g / 50 g ECC with up to 120 bit correction per 1 KByte page NAND Flash Technology: 3D Triple-Level Cell (TLC) Mean Time Between Failure: > 2,000,000 hours 16 Data Reliability: < 1 non-recoverable error per 10 bits read Product Features Dynamic and Static Wear Leveling Subpage Mode Flash Translation Layer (FTL) Active and Passive Data Care Management Lifetime Enhancements: Dynamic Bad Block Remapping and Write Amplification Reduction On-Board Power Fail Protection Deallocate and I/O Queues NVMe Security Command Support Active State Power Management (ASPM) Support In-Field Firmware Update Enterprise-Grade Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) 30 inch Gold-Plated Connector (IPC-6012B Class 2 Compliant) End-to-End (E2E) Data Protection AES256 Encryption TCG Opal 2.0 Compliant (on request) Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request) Why Swissbit Swissbit is focused on the design, development, manufacture, and support of leading edge memory and storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, Swissbit recognizes and addressees the higher level of application requirements of todays industrial, Netcom, and automotive customers by providing best-in-class products and services, with uncompromised attention to driving overall value and quality. * Adequate airflow is required to ensure the temperature, as reported in the S.M.A.R.T. data, does not exceed 125C (industrial temperature drive) and 110C (commercial temperature drive) respectively. According to JEDEC (JESD47I), the time to write the full TBW is a minimum of 18 months. Higher average daily data volume reduces the specified TBW. The values listed are estimates and are subject to change without notice. Swissbit AG Revision: 1.00 Industriestrasse 4 Doc-2791 CH-9552 Bronschhofen www.swissbit.com File: N-10m2 2280 fact sheet Rev100 Switzerland industrial swissbit.com Page 2 of 2