Product Fact Sheet Industrial mSATA SSD (MO-300 Full size) X-600m Series SATA Gen3 6.0 Gbits/s, SLC Commercial and Industrial Temperature Grade Date: November 09, 2021 Revision: 1.09 Product Fact Sheet X-600m Series Product Summary Capacities: 4 GBytes, 8 GBytes, 16 GBytes, 32 GBytes, 64 GBytes, 128GBytes Form Factor: JEDEC MO-300 Full Size mSATA SSD (50.8 mm x 29.85 mm x 3.5 mm) 1 Compliance : SATA Gen3 - 6 Gbit/s (Gen2 - 3 Gbit/s and Gen1 - 1.5 Gbit/s backward compatible) Command Sets: Supports ATA/ATAPI-8 and ACS-2 (2011/06/22) Performance: o Read Performance: Sequential Read up to 520 MBytes/s, Random Read 4K up to 76,000 IOPS o Write Performance: Sequential Write up to 405 MBytes/s, Random Write 4K up to 73,000 IOPS 2 Operating Temperature Range : o Commercial: 0 C to 70 C o Industrial: -40 C to 85 C Storage Temperature Range: -40 C to 85 C Operating Voltage: 3.3 V 5% Power (Max Capacity): Read (Active): 1.7 W Write (Active): 2.5 W Idle: 380 mW Slumber: 115 mW Data Retention: 10 Years Life Begin 1 Year Life End 3 Endurance in TeraBytes Written (TBW) Max Capacity : Client 7,715 Embedded 2,500 Enterprise > 1,115 Shock/Vibration: 1,500 g / 50 g Hardware BCH Code ECC: up to 66 bit correction per 1 KByte page Mean Time Between Failure (MTBF): > 2,000,000 hours 16 Data Reliability: < 1 non-recoverable error per 10 bits read Product Features Dynamic and Static Wear Leveling Subpage Mode Flash Translation Layer (FTL) Active and Passive Data Care Management Lifetime Enhancements o Dynamic Bad Block Remapping o Write Amplification Reduction On-Board Power Fail Protection AHCI, TRIM, and NCQ Support ATA Security Feature Set Support DEVSLP Compatible 4 In-Field Firmware Update Enterprise-Grade Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) 30 inch Gold-Plated Connector (IPC-6012B Class 2 Compliant) AES256 Encryption (on request) Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request) Why Swissbit Swissbit is focused on the design, development, manufacture, and support of leading edge memory and storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, Swissbit recognizes and addressees the higher level of application requirements of todays industrial, Netcom, and automotive customers by providing best-in-class products and services, with uncompromised attention to driving overall value and quality. 1 The verification of host system and storage device compatibility is in customers responsibility. Swissbit can provide guidance and support on request. 2 Adequate airflow is required to ensure the temperature, as reported in the S.M.A.R.T. data, does not exceed 115C (industrial temperature drive) and 100C (commercial temperature drive) respectively. 3 According to JEDEC (JESD47I), the time to write the full TBW is a minimum of 18 months. Higher average daily data volume reduces the specified TBW. The values listed are estimates and are subject to change without notice. 4 The support of In-Field FW update capabilities on host systems is recommended. Swissbit AG Revision: 1.09 Industriestrasse 4 TLP: Swissbit public Template: Doc-4991 CH-9552 Bronschhofen File: X-600m fact sheet Rev109 Switzerland www.swissbit.com/contact Page 2 of 2