Product Fact Sheet Industrial SLIM SATA SSD (MO-297) durabit the better MLC X-60s Series SATA III - 6.0 Gbit/s Product Fact Sheet Industrial MO-297 SLIM SATA SSD X-60s Series SATA III - 6.0Gbit/s X-60s Series Industrial Slim SATA Solid State Drive Product Summary Capacities: 30 GBytes, 60 GBytes, 120 GBytes, 240 GBytes, 480 GBytes Form Factor: JEDEC MO-297 Slim SATA (54 mm x 39 mm x 4 mm) Compliance: SATA Revision 3.1 - 6 Gbit/s (3 Gbit/s and 1.5 Gbit/s backward compatible) Command Sets: Supports ATA/ATAPI-8 and ACS-2 Performance: o Read Performance: Sequential Read up to 520 MBytes/s, Random Read IOPs up to 75,000 o Write Performance: Sequential Write up to 450 MBytes/s, Random Write IOPs up to 75,000 * Operating Temperature Range : o Commercial: 0 C to 70 C o Industrial: -40 C to 85 C Storage Temperature Range: -40 C to 85 C Operating Voltage: 5 V 10% and 3.3 V 5% Power (Max Capacity): o 3.3V: Read (Active): 1.5 W Write (Active): 3.2 W Idle: 380 mW Slumber: 115 mW o 5V: Read (Active): 1.7 W (5 V) Write (Active): 3.7 W Idle: 550 mW Slumber: 275 mW Data Retention: 10 Years Life Begin 1 Year Life End Endurance in TeraBytes Written (TBW) Max Capacity : Client > 975 Embedded > 280 Enterprise > 235 Shock/Vibration: 500 g/20 g (MIL-STD810) Hardware BCH Code ECC: up to 66 bit correction per 1 KByte page Mean Time Between Failure: > 2,000,000 hours 16 Data Reliability: < 1 non-recoverable error per 10 bits read Product Features Best-in-Class Performance and Endurance with dura bi t Technology Dynamic and Static Wear Leveling Active and Passive Data Care Management Lifetime Enhancements o Dynamic Bad Block Remapping o Write Amplification Reduction On-Board Power Fail Protection AHCI, TRIM, and NCQ Support ATA Security Feature Set Support In-Field Firmware Update Enterprise-Grade Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) AES256 Encryption (on request) Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request) Why Swissbit Swissbit is focused on the design, development, manufacture, and support of leading edge memory and storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, Swissbit recognizes and addressees the higher level of application requirements of todays industrial, Netcom, and automotive customers by providing best-in-class products and services, with uncompromised attention to driving overall value and quality. * Adequate airflow is required to ensure the drive temperature, as reported in the S.M.A.R.T. data, does not exceed the specified maximum operating temperature. According to JEDEC (JESD47I), the time to write the full TBW is 18 months. Higher average daily data volume reduces the specified TBW. Swissbit AG Revision: 1.05 Industriestrasse 4 CH-9552 Bronschhofen www.swissbit.com X-60s fact sheet Rev105.docx Switzerland industrial swissbit.com Page 2 of 2