SFSD016GL1BM1TO-I-QG-221-STD Swissbit

Product Fact Sheet Industrial SD/SDHC Memory Card S-450 Series UHS-I Interface, SLC BU: Flash Products Date: March 29, 2012 Revisio n: 1.00 File: factsheet - titel rz4. docx Prod uct fact shee t S-450 Series (UHS-I, SLC) Industrial SD/SDHC Memory Card - 512MByte to 32GByte Main Feature Fully compliant with SD Memory Card specification 3.0 o SD ultra high speed mode, speed class 1 (SDR104) o SD high speed mode, up to speed class 10 o SD2.0 SDHC backward compliant, default speed and high speed mode o FAT32 up to 32GB SDHC High performance 3.0 specification o SD burst up to 104MB/s o SD Normal speed 025MHz clock rate o SD High speed 2550MHz clock rate o SD UHS-I speed 0...50MHz (DDR) and 0208MHz (SDR) o Up to 90MByte/sec sequential data rate Power Supply: (Low-power CMOS technology) o 2.73.6V operating voltage Standard SD Memory card form factor o 32.0mm x 24.0mm x 2.1mm and Write Protect slider Optimized FW algorithms especially for high read access and long data retention applications o Patented power-off reliability technology o Wear Leveling technology Equal wear leveling of static and dynamic data. The wear leveling assures that dynamic data as well as static data is balanced evenly across the memory. With that the maximum write endurance of the device is guaranteed o Write Endurance technology Due to intelligent wear leveling an even use of the entire flash is guaranteed, regardless how much static (OS) data is stored. o Read Disturb Management The read commands are monitored and the content is refreshed when critical levels have occurred o Data Care Management The interruptible background process maintain the user data for Read Disturb effects or Retention degradation due to high temperature effects o Near Miss ECC technology Minimize the risk of uncorrectable bit failure over the product life time. Each read command analyzes the ECC margin level and refresh data if necessary o Diagnostic features with Life Time Monitoring tool support High reliability o SLC Flash o Designed for industrial market especially read intensive application like navigation, infotainment, POS/POI, medical and general boot medium use case o The product is optimized for long life cycle that requires good data retention because of high temperature mission profile. o Intensive write application should use the S-450 Series SLC cards o Number of card insertions/removals 20,000 o Extended and Industrial Temperature range -25 up to 85C and -40 up to 85C, respectively o SIP (System In Package) process for extreme dust, water and ESD proof o Selected AEC-Q100 qualification Controlled BOM & PCN process Manufactured in a TS 16949 certified factory Customized options like CID registers, CPRM keys, firmware incl. settings and marking by projects Swissbit AG Revision: 1.02 Industriestrasse 4 CH-9552 Bronschhofen www.swissbit.com S-450 fact sheet SD-LxBM Rev102.docx Switzerland industrial swissbit.com Page 2 of 3