Product Fact Sheet Industrial USB Flash Drive Module U-110 Series USB2.0 high speed 2.54mm and 2.0mm connector U-110 Series (USB2.0, high speed) Industrial USB Flash Drive Module (eUSB) 1 to 16GByte Main Features USB2.0 solid state flash drive for internal 9(10)-pin USB connector terminal o Fully compliant with USB specification 2.0 (High-Speed, 480Mb/s burst) o Fully backward compliant with USB 1.1 systems (Full speed, 12Mb/s burst) o Dimension of 26.65 x 36.8mm o 2.54mm or 2.00mm connector with keyed pin9 (optional different key pins and pinouts) o Screw hole not connected (optional grounded) o Fix drive (optional removable) o LED for operation indication o Write protect switch (optional) o FAT32 preformatted o Diagnostic features with Life Time Monitoring tool support High performance 2.0 specification o Up to 29 and 9MByte/sec sequential read and write speed Power Supply: (Low-power CMOS technology) o 4.5 to 5.5V operating voltage Optimized FW algorithms o Patented power-off reliability technology o Wear Leveling technology Equal wear leveling of static and dynamic data. The wear leveling assures that dynamic data as well as static data is balanced evenly across the memory. With that the maximum write endurance of the device is guaranteed -14 o UBER <10 High reliability o SLC NAND Flash with highest program erase cycles per block o Designed with sophisticated firmware architecture for industrial and netcom market o Commercial and Industrial Temperature range, 0 up to 70C and -40 up to 85C Plug&Play Bootable, Fix Drive LED indicator FAT32 format Unique serial number Controlled BOM & PCN process RoHS, China-RoHS, REACH compatible, WEEE, CE, FCC compliant Options Customized options like registers, removable device, connector options, write protect switch, grounded mounting hole, conformal coating, densities, uploads, label, CD partition, Swissbit AG Revision: 1.00 Industriestrasse 4 CH-9552 Bronschhofen www.swissbit.com U-110 fact sheet UI-xxBP Rev100 Switzerland industrial swissbit.com Page 2 of 3