HIGH POWER PRODUCT BULLETIN CONNECTORS Panel Mounts and Cord Plugs 544 HPC Series Switchcraft recently introduced a complete line of panel mount speaker connectors that are completely compatible with the Neutrik Speakon 4 pole series. We are now introducing a complete line of cable mounts as well. The complete HPC Series offers both panel mount and cord mount connectors. The HPC panel mounts have been updated with new silver-plated contact materials that boost the contact ratings to 30A per UL 1977 on PC mount versions, 50A per UL 1977 on Faston versions. They are still available with either 0.100 depth flanges or 0.200 depth flanges. The 0.200 depth flange allows for rear mounting of the HPC Series, and proper mating of all cord plugs. The panel mount versions are available with either 0.187 or 0.250 Faston terminals, and either straight or right angle PC mount terminals. The right angle PC mount version also has, as an option, a mounting post which allows the connector to snap onto the PC board for wave soldering. The HPC cord plugs are available in either straight, right angle, or as an in-line. The in-line version mates with either the straight or right angle cord plug, allowing the end user to extend cable runs. All cord plugs are compatible with Speakon panel mounts. The in-line mates with our HPC cord plugs, as well as Speakon cord plugs. The unique feature of the HPC series cord plugs are the push to lock feature, similar to the connection of an XLR connector. The HPC cord plugs, when mated to either HPC panel mounts or Speakon panel mounts do not require a 1/4 turn to engage. Simply push the connector in until it locks. To disengage, push forward on the latch lever and pull the connector out. This feature eliminates the need to remember to turn the connector to make contact. All HPC cord plugs utilize 0.250 Faston terminals, which allow for easy assembly, and make it easy to change cord plugs. To change from a straight cord plug to an in-line cord plug, back off the strain relief nut, twist off the handle, disconnect the Faston terminals, fasten the new cord connector, twist on the handle and the strain relief. Barbs on the handle keep the handle from vibrating loose from the front shell. Both HPC panel mounts and cord plugs incorporate a built-in gasket, which allows them to meet IP 25 harsh environment ratings, as well as IEC 529 and IEC 1010-1 safety ratings. Features and Benefits Completely compatible with Neutrik Speakon 4 pole connectors 30A rating per UL 1977 on PC mount versions 50A rating per UL 1977 on Faston versions Panel mounts have two different Faston terminal sizes, 0.187 and 0.250 Continued2 HIGH POWER CONNECTORS PRODUCT BULLETIN 544 Features and Benefits continued Panel mounts offered with two different flange depths, 0.100 and 0.200 0.200 depth flange offers easy rear mounting Right angle or straight PC board terminals on panel mounts Built in gasket gives all HPC connectors IP 25 environmental ratings All HPC Series meet IEC 529 and IEC 1010-1 safety ratings Cord plug versions offer push to lock design, no 1/4 turn to engage Cord plug versions accept 10 AWG wire, 0.560 cable OD max Markets Loudspeakers Medical Power audio amplifiers Process Controls Specifications Materials Mechanical Housings: Thermoplastic Shock: Mil-Std 202, Method 213B UL 94V-O rated Cond.K Seal Rings: Thermoplastic rubber Vibration: Mil-Std 202, Method 201A Contacts: Silver-plated over Life: 1,000 insertion/withdrawals copper alloy Cable Range: 0.560 OD max Electrical Environmental PC Terminals Current Rating: 30A per Salt Spray: Mil-Std 202, Method 101D UL 1977 Cond. B Faston Terminals Current Rating: Thermal Shock: Mil-Std 202, Method 50A RMS w/10AWG wire, normal 107G ambient, per UL 1977 Temperature Limits: -55 C to +85 C Voltage Rating: 1,500 AC RMS, Per Moisture Resistance: Mil-Std 202, Mil-Std 202 Method 301 Method 106E Insulation Resistance: > 2T Ohms Life Ambient Temperature: Mil-Std Contact Resistance: 1m Ohm, 202, Method 108A 1.5mOhm after 1,000 Touch Proof: IEC 65 and 1010-1 insertion/withdrawals Weather Tightness: IEC 529, IP 25 Panel Mount Ordering information H PC P 4 Series Termination High Power Connector F - .250 Faston F1 - .187 Faston Type of Connector PC - Printed Circuit P - Panel RA - Right angle PC Type of Housing RAP - Right angle PC with mounting post Blank - rectangle R - round Mounting Holes Blank - Rectangle: .140 dia. w/Countersink Hole Number of Contacts Blank - Round: .152 dia. w/Countersink Hole 4 0 - Rec./ Round: .093 Dia. Hole Recessed Flange (Dim. A) 1 - .100 2 - .200 Cord Mount Ordering Information Part Number Description Part Number Description HPCC4F Straight Cord Plug HPCI4F Inline Cord Plug HPCC4FRAF Right Angle Cord Plug