ASSEMBLY P/N NO. OF CONTACT NOTES: SF8382-2PG-5XX (2) 16 1. FINISHED ASSEMBLIES AND LOOSE PARTS BAGGED. 2. LABEL WITH CONXALL PART NUMBER, DATE CODE AND P/N BARCODE PLACED ON BAG SF8382-3PG-5XX (3) 16 3. SEE DRAWING HPSFMISTD FOR HOLE PATTERNS SF8382-4PG-5XX (4) 16 4. FOR FIELD INSTALLATION, SEE INSTRUCTION SHEET 2 OF 2. 5. ALL DIMENSIONS ARE REFERENCE EXCEPT THOSE WITH A TOLERANCE SF8382-5PG-5XX (5) 16 SF8382-6PG-5XX (6) 16 520 = BACKSHELL WITH .220 5.6 GROMMET I.D. 530 = BACKSHELL WITH .330 8.4 GROMMET I.D750 19.1 (2) 4x3/8 IN SELF TAPPING SCREWS MAT L: STAINLESS STEEL CABLE STRAP MAT L: NYLON, BLACK .770 1.00 19.6 25.4 1.429 .375 .997 INSERT 36.3 9.5 25.3 .174 MAT L: PBT, BLACK KEY KEY 4.4 5 1 1 5 2.300 2 58.4 4 2 4 6 6 INSULATOR TUBE 3 3 MAT L: MYLAR GROMMET MAT L: RUBBER, BLACK FACE VIEW BACKSHELL HOUSING ADAPTER WIRE VIEW SF8382-6PG-5XX MAT L: NYLON, BLACK MAT L: NICKEL PLATED BRASS HOUSING SF8382-6PG-5XX SHOWN SHOWN WASHER MAT L: NICKEL PLATED BRASS WITHOUT HARDWARE MAT L: NYLON (X) 20 PIN CONTACTS, SOLDER MAT L: GOLD PLATED COPPER ALLOY O-RING MAT L: SILICONE, RED 2.515 COPPER TAPE 63.9 ASSEMBLED VIEW FOR CUSTOMER REFERENCE ONLY 1 3 1 4 1 5 1 CUSTOMER APPROVAL MA 01-29-19 RELEASED PER PDR 17011 THIS DOCUMENT CONTAINS CONFIDENTIAL O-RING 4290S REPLACES SF6290S-1. A PNK 12-20-18 INFORMATION PROPRIETARY TO CONXALL 4 2 CORPORATION. ANY REPRODUCTION, PNK 1-30-18 DRAWING CREATED PER PDR17011 DISCLOSURE, OR USE OF THIS 2 3 REV. INIT. DATE DESCRIPTION DOCUMENT /INFORMATION IS EXPRESSLY ORIG. DRAWN BY: DATE: ALL INFORMATION ILLUSTRATED IS PROHIBITED UNLESS AUTHORIZED IN THE PROPERTY OFCONXALL PNK 1-30-18 3 CORPORATION UNAUTHORIZED 2 2 WRITING BY CONXALL CORPORATION. DUPLICATION OR DISTRIBUTION OF CHECKED BY: THIS DOCUMENT IS PROHIBITED. WIRE VIEW WIRE VIEW WIRE VIEW WIRE VIEW 601 E. WILDWOOD VILLA PARK, IL 60181 ALL UNITS ARE IN FEET, APPROVED BY: SF8382-2PG-5XX INCHES, FRACTION OF INCHES SF8382-3PG-5XX SF8382-4PG-5XX SF8382-5PG-5XX APPROVED BY: TITLE: AND DECIMALS. CABLE-TO-CABLE ASSEMBLY DATE: UNLESS OTHERWISE SPECIFIED (2-6) 16 PIN CONTACTS, SOLDER TOLERANCES: SCALE SIZE SHEET SHIELDED MINI-CON-X 3 PLACE DECIMALS .005 ANGLES 1 CUSTOMER: STANDARD PRODUCT NTS B 1 OF 2 FRACTIONS 1/16 DIMENSIONS IN BRACKETS ARE IN MILLIMETERS FILE: DIRECTORY: REV PART RoHS COMPLIANT = CRITICAL CHARACTERISTIC SF8382-XPG-5XX NUMBER: FLAG PER SPEC. XXXX SF8382-XPG-5XX SLW A PART CUSTOMER PRINT SF8382-XPG-5XX NUMBER:CABLE SHIELD HOUSING ADAPTER CABLE CONDUCTORS CABLE WIRING AND ASSEMBLY INSTRUCTIONS: CABLE INSULATOR TUBE STEP 1. SLIDE HOUSING ADAPTER, INSULATOR TUBE, AND BACKSHELL KIT, ONTO CABLE IN THE ORDER SHOWN. STEP 2. STRIP CABLE JACKET AND WIRES TO LENGTH. EXCESS CABLE SHIELD MUST BE TRIMMED OR WRAPPED AROUND WIRES. IF PRESENT, USE THE DRAIN WIRE TO WRAP THE CABLE SHIELD IN PLACE. STEP 3. SOLDER WIRES TO CONTACTS. INLINE .125 CONNECTOR BACKSHELL KIT 3.2 DRAIN WIRE (IF PRESENT) .625 15.9 1.125 28.6 CONDUCTIVE TAPE WRAPPED ONTO INSULATOR TUBE STEP 4. THREAD HOUSING ADAPTER ONTO CONNECTOR AND TIGHTEN TO 5 LB-IN 0.56 N-m MINIMUM TORQUE. STEP 5. PEEL-OFF THE BACKING OF THE CONDUCTIVE TAPE AND WRAP IT AROUND THE INSULATOR AS SHOWN080 2 CONDUCTIVE TAPE WRAPPED TIGHTLY ONTO CABLE SHIELD STEP 6. SLIDE INSULATOR/CONDUCTIVE TAPE INTO THE BACK OF THE CONNECTOR. FORM FREE END OF CONDUCTIVE TAPE TIGHTLY ONTO THE SHIELD OF THE CABLE. STEP 7. SLIDE AND THREAD THE BACKSHELL KIT ONTO CONNECTOR. TIGHTEN TO 5 LB-IN 0.56 N-m MINIMUM TORQUE. STEP 8. TIGHTEN THE TWO BACKSHELL SCREWS TO SECURE THE CABLE IN THE BACKSHELL. COMPLETED ASSEMBLY MA 04-03-19 RELEASED PER PDR 17011 12-20-18 O-RING 4290S REPLACES SF6290S-1. A PNK PNK 1-30-18 DRAWING CREATED PER PDR 17011 REV. INIT. DATE DESCRIPTION ORIG. DRAWN BY: DATE: ALL INFORMATION ILLUSTRATED IS THE PROPERTY OFCONXALL PNK 1-30-18 CORPORATION UNAUTHORIZED DUPLICATION OR DISTRIBUTION OF CHECKED BY: THIS DOCUMENT IS PROHIBITED. 601 E. WILDWOOD VILLA PARK, IL 60181 ALL UNITS ARE IN FEET, INCHES, FRACTION OF INCHES APPROVED BY: TITLE: AND DECIMALS. CABLE-TO-CABLE ASSEMBLY UNLESS OTHERWISE SPECIFIED (2-6) 16 PIN CONTACTS, SOLDER TOLERANCES: SCALE SIZE SHEET SHIELDED MINI-CON-X 3 PLACE DECIMALS .005 ANGLES 1 CUSTOMER: STANDARD PRODUCT NTS B 2 OF 2 FRACTIONS 1/16 FILE: DIRECTORY: REV PART = CRITICAL CHARACTERISTIC SF8382-XPG-5XX NUMBER: FLAG PER SPEC. XXXX FILE NAME SLW A PART CUSTOMER PRINT SF8382-XPG-5XX NUMBER: