ASSEMBLY P/N NO. OF CONTACT CUSTOMER APPROVAL NOTES: THIS DOCUMENT CONTAINS CONFIDENTIAL SF8980-9SG-5XX (9) 26 1. FINISHED ASSEMBLIES AND LOOSE PARTS BAGGED. INFORMATION PROPRIETARY TO CONXALL 2. LABEL WITH CONXALL PART NUMBER, DATE CODE AND P/N BARCODE PLACED ON BAG CORPORATION. ANY REPRODUCTION, SF8980-10SG-5XX (10) 26 3. SEE DRAWING HPSFMISTD FOR HOLE PATTERNS DISCLOSURE, OR USE OF THIS 4. FOR FIELD INSTALLATION, SEE INSTRUCTION SHEET 2 OF 2 SF8980-11SG-5XX (11) 26 DOCUMENT /INFORMATION IS EXPRESSLY 5. ALL DIMENSIONS ARE REFERENCE EXCEPT THOSE WITH A TOLERANCE PROHIBITED UNLESS AUTHORIZED IN SF8980-12SG-5XX (12) 26 6. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS WRITING BY CONXALL CORPORATION. 7. CRIMP CONTACTS SUPPIED UNASSEMBLED SF8980-13SG-5XX (13) 26 APPROVED BY: SF8980-14SG-5XX (14) 26 DATE: SF8980-15SG-5XX (15) 26 SF8980-16SG-5XX (16) 26 .750 SF8980-17SG-5XX (17) 26 19.1 (2) 4x3/8 IN SF8980-18SG-5XX (18) 26 SELF TAPPING SCREWS MAT L: STAINLESS STEEL 520 = BACKSHELL WITH .220 5.6 GROMMET I.D. CABLE STRAP 530 = BACKSHELL WITH .330 8.4 GROMMET I.D. MAT L: NYLON, BLACK COPPER TAPE .877 .770 22.3 1.429 .375 .997 19.6 .120.010 36.3 9.5 25.3 KEY KEY 30.3 18 11 1 12 17 2 10 2.30 58.4 3 9 13 16 4 14 8 INSULATOR TUBE 5 7 MAT L: MYLAR 6 15 HOUSING MAT L: NICKEL PLATED BRASS BACKSHELL ADAPTER HOUSING WIRE VIEW FACE VIEW MAT L: NYLON, BLACK MAT L: NICKEL PLATED BRASS O-RING SF8980-18SG-5XX SHOWN SF8980-18SG-5XX SHOWN MAT L: SILICONE, RED WITHOUT HARDWARE (X) 26 SOCKET CONTACTS CRIMP TYPE INSERT MAT L: GOLD PLATED COPPER ALLOY MAT L: PBT, BLACK SEE NOTE 7 1 1 18 1 2.515 11 11 11 1 11 63.9 10 2 10 2 10 2 2 10 2 10 9 3 9 3 9 3 9 3 9 3 16 13 8 4 8 4 8 4 8 4 8 4 7 5 7 5 7 5 7 5 5 7 6 6 6 6 ASSEMBLED VIEW WIRE VIEW WIRE VIEW WIRE VIEW WIRE VIEW WIRE VIEW FOR CUSTOMER REFERENCE ONLY 9 POSITIONS 10 POSITIONS 11 POSITIONS 12 POSITIONS 13 POSITIONS 18 18 18 18 11 1 11 1 11 11 1 11 1 1 17 12 17 12 17 12 12 MA 01-31-19 RELEASED PER PDR 17011 10 10 2 10 2 2 10 2 10 2 9-28-18 RES-79 CHANGED TO RES-78. O-RING 4290S REPLACES SF6290S-1. A PNK 9 1-30-18 DRAWING CREATED PER PDR 17011 PNK 9 3 9 3 3 9 3 9 3 REV. INIT. DATE DESCRIPTION 8 ORIG. DRAWN BY: DATE: ALL INFORMATION ILLUSTRATED IS 13 16 16 16 16 13 13 THE PROPERTY OFCONXALL PNK 1-30-18 4 CORPORATION UNAUTHORIZED 4 15 DUPLICATION OR DISTRIBUTION OF CHECKED BY: 8 4 8 8 4 THIS DOCUMENT IS PROHIBITED. 8 4 601 E. WILDWOOD VILLA PARK, IL 60181 7 5 7 5 5 7 5 ALL UNITS ARE IN FEET, 7 14 7 5 14 15 14 INCHES, FRACTION OF INCHES 6 15 APPROVED BY: TITLE: 6 14 6 AND DECIMALS. CABLE-TO-CABLE ASSEMBLY 6 6 UNLESS OTHERWISE SPECIFIED (9-18) 26 SOCKET CONTACTS, CRIMP TOLERANCES: WIRE VIEW WIRE VIEW WIRE VIEW WIRE VIEW WIRE VIEW SCALE SIZE SHEET SHIELDED MINI-CON-X 3 PLACE DECIMALS .005 ANGLES 1 CUSTOMER: STANDARD PRODUCT 14 POSITIONS 15 POSITIONS 16 POSITIONS 17 POSITIONS 18 POSITIONS NTS B 1 OF 2 FRACTIONS 1/16 FILE: DIRECTORY: REV RoHS COMPLIANT PART = CRITICAL CHARACTERISTIC SF8980-XSG-5XX NUMBER: FLAG PER SPEC. XXXX SF8980-XSG-5XX SLW A PART CUSTOMER PRINT SF8980-XSG-5XX NUMBER:CABLE CONDUCTORS CABLE SHIELD HOUSING ADAPTER .051 CABLE WIRING AND ASSEMBLY INSTRUCTIONS: CABLE JACKET INSULATOR TUBE 1.3 STEP 1. SLIDE HOUSING ADAPTER, INSULATOR TUBE, AND BACKSHELL KIT, ONTO CABLE IN THE ORDER SHOWN. STEP 2. STRIP CABLE JACKET AND WIRES TO LENGTH. EXCESS CABLE SHIELD MUST BE TRIMMED OR WRAPPED AROUND WIRES. IF PRESENT, USE THE DRAIN WIRE TO WRAP THE CABLE SHIELD IN PLACE. STEP 3. CRIMP WIRES TO CONTACTS. INLINE .125 STEP 3A. INSERT THE WIRED CONTACT INTO THE CAVITY AND FIRMLY PUSH THE CONTACT UNTIL IT LOCKS INTO PLACE. CONNECTOR BACKSHELL KIT 3.2 GIVE A SLIGHT PULL ON THE WIRE TO INSURE THE CONTACT IS SEATED. THE CONTACT BARREL SHOULD .625 DRAIN WIRE (IF PRESENT) PROJECT BEYOND THE INSERT ACCORDING TO DIMENSION ABOVE. 15.9 1.125 28.6 CONDUCTIVE TAPE WRAPPED ONTO INSULATOR TUBE STEP 4. THREAD HOUSING ADAPTER ONTO CONNECTOR AND TIGHTEN TO 5 LB-IN 0.56 N-m MINIMUM TORQUE. STEP 5. PEEL-OFF THE BACKING OF THE CONDUCTIVE TAPE AND WRAP IT AROUND THE INSULATOR AS SHOWN080 2 CONDUCTIVE TAPE WRAPPED TIGHTLY ONTO CABLE SHIELD STEP 6. SLIDE INSULATOR/CONDUCTIVE TAPE INTO THE BACK OF THE CONNECTOR. FORM FREE END OF CONDUCTIVE TAPE TIGHTLY ONTO THE SHIELD OF THE CABLE. STEP 7. SLIDE AND THREAD THE BACKSHELL KIT ONTO CONNECTOR. TIGHTEN TO 5 LB-IN 0.56 N-m MINIMUM TORQUE. STEP 8. TIGHTEN THE TWO BACKSHELL SCREWS TO SECURE THE CABLE IN THE BACKSHELL. COMPLETED ASSEMBLY MA 04-03-19 RELEASED PER PDR 17011 9-28-18 RES-79 CHANGED TO RES-78. O-RING 4290S REPLACES SF6290S-1. A PNK PNK 9-28-18 DRAWING CREATED PER PDR 17011 REV. INIT. DATE DESCRIPTION ORIG. DRAWN BY: DATE: ALL INFORMATION ILLUSTRATED IS THE PROPERTY OFCONXALL PNK 1-30-18 CORPORATION UNAUTHORIZED DUPLICATION OR DISTRIBUTION OF CHECKED BY: THIS DOCUMENT IS PROHIBITED. 601 E. WILDWOOD VILLA PARK, IL 60181 ALL UNITS ARE IN FEET, INCHES, FRACTION OF INCHES APPROVED BY: TITLE: AND DECIMALS. CABLE-TO-CABLE ASSEMBLY UNLESS OTHERWISE SPECIFIED (9-18) 26 SOCKET CONTACTS, CRIMP TOLERANCES: SCALE SIZE SHEET SHIELDED MINI-CON-X 3 PLACE DECIMALS .005 ANGLES 1 2 OF 2 CUSTOMER: STANDARD PRODUCT NTS B FRACTIONS 1/16 FILE: DIRECTORY: REV PART = CRITICAL CHARACTERISTIC SF8980-XSG-5XX NUMBER: FLAG PER SPEC. XXXX FILE NAME SLW A PART CUSTOMER PRINT SF8980-XSG-5XX NUMBER: