ASSEMBLY P/N NO. OF CONTACT CUSTOMER APPROVAL SF8982-9SG-5XX (9) 26 THIS DOCUMENT CONTAINS CONFIDENTIAL NOTES: INFORMATION PROPRIETARY TO CONXALL SF8982-10SG-5XX (10) 26 1. FINISHED ASSEMBLIES AND LOOSE PARTS BAGGED WITH AN INSTRUCTION SHEET CORPORATION. ANY REPRODUCTION, 2. LABEL WITH CONXALL PART NUMBER, DATE CODE AND P/N BARCODE PLACED ON BAG SF8982-11SG-5XX (11) 26 DISCLOSURE, OR USE OF THIS 3. SEE DRAWING HPSFMISTD FOR HOLE PATTERNS DOCUMENT /INFORMATION IS EXPRESSLY SF8982-12SG-5XX (12) 26 4. FOR FIELD INSTALLATION, SEE INSTRUCTION SHEET 2 OF 2. PROHIBITED UNLESS AUTHORIZED IN 5. ALL DIMENSIONS ARE REFERENCE EXCEPT THOSE WITH A TOLERANCE WRITING BY CONXALL CORPORATION. SF8982-13SG-5XX (13) 26 6. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS SF8982-14SG-5XX (14) 26 APPROVED BY: SF8982-15SG-5XX (15) 26 DATE: SF8982-16SG-5XX (16) 26 SF8982-17SG-5XX (17) 26 SF8982-18SG-5XX (18) 26 .750 (2) 4x3/8 IN 19.1 520 = BACKSHELL WITH .220 5.6 GROMMET I.D. SELF TAPPING SCREWS 530 = BACKSHELL WITH .330 8.4 GROMMET I.D. MAT L: STAINLESS STEEL CABLE STRAP MAT L: NYLON, BLACK .967 .770 1.429 24.6 .375 .997 19.6 INSERT 36.3 9.5 25.3 MAT L: PBT, BLACK .141 18 KEY 3.6 1 18 11 11 1 17 12 12 17 2 10 2 10 2.30 3 9 3 58.4 9 13 16 13 16 4 4 8 14 8 14 5 INSULATOR TUBE 7 5 7 15 6 6 15 MAT L: MYLAR HOUSING ADAPTER HOUSING FACE VIEW BACKSHELL MAT L: NICKEL PLATED BRASS MAT L: NICKEL PLATED BRASS MAT L: NYLON, BLACK SF8982-18SG-5XX WIRE VIEW WASHER SHOWN SF8982-18SG-5XX SHOWN O-RING MAT L: NYLON (X) 26 SOCKET CONTACTS, SOLDER WITHOUT HARDWARE MAT L: SILICONE, RED MAT L: GOLD PLATED COPPER ALLOY COPPER TAPE 2.515 18 1 1 1 11 11 11 11 1 63.9 10 2 10 2 10 2 10 2 10 2 9 3 9 3 9 3 9 3 9 3 16 13 8 4 8 4 8 4 8 4 4 8 7 5 7 5 7 5 7 5 5 7 6 6 6 6 ASSEMBLED VIEW WIRE VIEW WIRE VIEW FOR CUSTOMER REFERENCE WIRE VIEW WIRE VIEW WIRE VIEW SF8982-10SG-5XX SF8982-11SG-5XX SF8982-12SG-5XX SF8982-13SG-5XX SF8982-9SG-5XX 18 18 18 1 1 1 11 11 1 11 11 MA 02-01-19 RELEASED PER PDR 17011 12 12 12 17 17 10 10 2 9-28-18 RES-79 CHANGED TO RES-78. O-RING 4290S REPLACES SF6290S-1. A PNK 2 2 10 2 10 1-30-18 DRAWING CREATED PER PDR 17011 PNK 9 3 9 3 9 3 9 3 REV. INIT. DATE DESCRIPTION ORIG. DRAWN BY: DATE: ALL INFORMATION ILLUSTRATED IS THE PROPERTY OFCONXALL PNK 1-30-18 CORPORATION UNAUTHORIZED 16 16 13 16 13 DUPLICATION OR DISTRIBUTION OF CHECKED BY: THIS DOCUMENT IS PROHIBITED. 4 8 4 601 E. WILDWOOD VILLA PARK, IL 60181 8 8 4 ALL UNITS ARE IN FEET, 4 8 5 INCHES, FRACTION OF INCHES APPROVED BY: TITLE: 5 6 AND DECIMALS. CABLE-TO-CABLE ASSEMBLY 7 7 5 7 6 5 7 14 6 15 14 6 15 14 UNLESS OTHERWISE SPECIFIED (9-18) 26 SOCKET CONTACTS, SOLDER TOLERANCES: SCALE SIZE SHEET SHIELDED MINI-CON-X 3 PLACE DECIMALS .005 WIRE VIEW WIRE VIEW WIRE VIEW WIRE VIEW ANGLES 1 CUSTOMER: STANDARD PRODUCT NTS B 1 OF 2 FRACTIONS 1/16 SF8982-14SG-5XX SF8982-16SG-5XX SF8982-17SG-5XX FILE: DIRECTORY: REV SF8982-15SG-5XX RoHS COMPLIANT PART = CRITICAL CHARACTERISTIC SF8982-XSG-5XX NUMBER: FLAG PER SPEC. XXXX SF8982-XSG-5XX SLW A PART CUSTOMER PRINT SF8982-XSG-5XX NUMBER:HOUSING ADAPTER CABLE SHIELD CABLE CONDUCTORS CABLE WIRING AND ASSEMBLY INSTRUCTIONS: CABLE INSULATOR TUBE STEP 1. SLIDE HOUSING ADAPTER, INSULATOR TUBE, AND BACKSHELL KIT, ONTO CABLE IN THE ORDER SHOWN. STEP 2. STRIP CABLE JACKET AND WIRES TO LENGTH. EXCESS CABLE SHIELD MUST BE TRIMMED OR WRAPPED AROUND WIRES. IF PRESENT, USE THE DRAIN WIRE TO WRAP THE CABLE SHIELD IN PLACE. STEP 3. SOLDER WIRES TO CONTACTS. INLINE .125 CONNECTOR 3.2 DRAIN WIRE (IF PRESENT) BACKSHELL KIT .625 15.9 1.125 CONDUCTIVE TAPE WRAPPED 28.6 ONTO INSULATOR TUBE STEP 4. THREAD HOUSING ADAPTER ONTO CONNECTOR AND TIGHTEN TO 5 LB-IN 0.56 N-m MINIMUM TORQUE. STEP 5. PEEL-OFF THE BACKING OF THE CONDUCTIVE TAPE AND WRAP IT AROUND THE INSULATOR AS SHOWN080 2 CONDUCTIVE TAPE WRAPPED TIGHTLY ONTO CABLE SHIELD STEP 6. SLIDE INSULATOR/CONDUCTIVE TAPE INTO THE BACK OF THE CONNECTOR. FORM FREE END OF CONDUCTIVE TAPE TIGHTLY ONTO THE SHIELD OF THE CABLE. STEP 7. SLIDE AND THREAD THE BACKSHELL KIT ONTO CONNECTOR. TIGHTEN TO 5 LB-IN 0.56 N-m MINIMUM TORQUE. STEP 8. TIGHTEN THE TWO BACKSHELL SCREWS TO SECURE THE CABLE IN THE BACKSHELL. COMPLETED ASSEMBLY MA 04-03-19 RELEASED PER PDR 17011 9-28-18 RES-79 CHANGED TO RES-78. O-RING 4290S REPLACES SF6290S-1. A PNK PNK 1-30-18 DRAWING CREATED PER PDR 17011 REV. INIT. DATE DESCRIPTION ORIG. DRAWN BY: DATE: ALL INFORMATION ILLUSTRATED IS THE PROPERTY OFCONXALL PNK 1-30-18 CORPORATION UNAUTHORIZED DUPLICATION OR DISTRIBUTION OF CHECKED BY: THIS DOCUMENT IS PROHIBITED. 601 E. WILDWOOD VILLA PARK, IL 60181 ALL UNITS ARE IN FEET, INCHES, FRACTION OF INCHES APPROVED BY: TITLE: AND DECIMALS. CABLE-TO-CABLE ASSEMBLY UNLESS OTHERWISE SPECIFIED (9-18) 26 SOCKET CONTACTS, SOLDER TOLERANCES: SCALE SIZE SHEET SHIELDED MINI-CON-X 3 PLACE DECIMALS .005 ANGLES 1 CUSTOMER: STANDARD PRODUCT NTS B 2 OF 2 FRACTIONS 1/16 FILE: DIRECTORY: REV PART = CRITICAL CHARACTERISTIC SF8982-XSG-5XX NUMBER: FLAG PER SPEC. XXXX FILE NAME SLW A PART CUSTOMER PRINT SF8982-XSG-5XX NUMBER: