2M82Z R0G Taiwan Semiconductor

2M6.8Z - 2M200Z Taiwan Semiconductor CREAT BY ART 2W, 6.8V - 200V Glass Passivated Junction Silicon Zener Diodes FEATURES - Glass passivated chip junction - Typical I less than 1A R - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA Case: DO-204AC (DO-15) DO-204AC (DO-15) Molding compound, UL flammability classification rating 94V-0 Part No. with suffix means AEC-Q101 qualified Packing code with suffix means green compound (halogen-free) Terminal: Pure tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Weight: 0.4g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERSTICS (T =25C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Steady state power dissipation at T =75C L P 2.0 Watts D Lead lengths .375 , 9.55mm (Note 1) Peak forward surge current, 8.3ms single half I 15 A FSM sine-wave superimposed on rated load Operating junction temperature range T - 55 to +175 C J Storage temperature range T - 55 to +175 C STG Note 1: Mounted on Cu-Pad size 10mm x 10mm on PCB ORDERING INFORMATION PART NO. PACKING CODE PART NO. PACKING CODE PACKAGE PACKING SUFFIX SUFFIX A0 DO-15 1,500 / Ammo box 2MxxxZ H R0 G DO-15 3,500 / 13 Paper reel (Note 1) B0 DO-15 1,000 / Bulk packing Note 1:xx defines voltage from 6.8V (2M6.8Z) to 200V (2M200Z) EXAMPLE PREFERRED PART NO. PACKING CODE PACKING CODE DESCRIPTION PART NO. PART NO. SUFFIX SUFFIX AEC-Q101 qualified 2M6.8ZHA0G 2M6.8Z H A0 G Green compound Document Number: DS D1409044 Version: M152M6.8Z - 2M200Z Taiwan Semiconductor CREAT BY ART RATINGS AND CHARACTERISTICS CURVES (T =25C unless otherwise noted) A Maximum Nominal Zener Test Maximum Zener Impedance (Notes 3) Leakage Current Zener Voltage (Notes 2) Current Device Current (Notes 1) I V V I I Z I Z I I I R R Z ZT ZT ZT ZT ZK ZK ZK ZM VmA mA AV mA 2M6.8Z 6.8 100 1.5 200 1.00 1000 5.5 246 2M11Z 11 45.5 4.0 700 0.25 1.0 8.4 166 2M12Z 12 41.5 4.5 700 0.25 1.0 9.1 152 2M13Z 13 38.5 5.0 700 0.25 0.5 9.9 138 2M14Z 14 35.7 5.5 700 0.25 0.5 10.6 130 2M15Z 15 33.4 7.0 700 0.25 0.5 11.4 122 2M16Z 16 31.2 8.0 700 0.25 0.5 12.2 114 2M17Z 17 29.4 9.0 750 0.25 0.5 13.0 107 2M18Z 18 27.8 10 750 0.25 0.5 13.7 100 2M19Z 19 26.3 11 750 0.25 0.5 14.4 95 2M20Z 20 25.0 11 750 0.25 0.5 15.2 90 2M22Z 22 22.8 12 750 0.25 0.5 16.7 82 2M24Z 24 20.8 13 750 0.25 0.5 18.2 76 2M27Z 27 18.5 18 750 0.25 0.5 20.6 68 2M30Z 30 16.6 20 1000 0.25 0.5 22.8 60 2M33Z 33 15.1 23 1000 0.25 0.5 25.1 55 2M36Z 36 13.9 25 1000 0.25 0.5 27.4 50 2M39Z 39 12.8 30 1000 0.25 0.5 29.7 47 2M43Z 43 11.6 35 1500 0.25 0.5 32.7 43 2M47Z 47 10.6 40 1500 0.25 0.5 35.8 39 2M51Z 51 9.8 48 1500 0.25 0.5 38.8 36 2M56Z 56 9.0 55 2000 0.25 0.5 42.6 32 2M62Z 62 8.1 60 2000 0.25 0.5 47.1 29 2M68Z 68 7.4 75 2000 0.25 0.5 51.7 27 2M75Z 75 6.7 90 2000 0.25 0.5 56.0 24 2M82Z 82 6.1 100 3000 0.25 0.5 62.2 22 2M91Z 91 5.5 125 3000 0.25 0.5 69.2 20 2M100Z 100 5.0 175 3000 0.25 0.5 76.0 18 2M110Z 110 4.5 250 4000 0.25 0.5 83.6 17 2M120Z 120 4.2 325 4500 0.25 0.5 91.2 15 2M130Z 130 3.8 400 5000 0.25 0.5 98.8 14 2M140Z 140 3.6 500 5500 0.25 0.5 106.4 13 2M150Z 150 3.3 575 6000 0.25 0.5 114.0 12 2M160Z 160 3.1 650 6500 0.25 0.5 121.6 11 2M170Z 170 2.9 675 7000 0.25 0.5 130.4 11 2M180Z 180 2.8 725 7000 0.25 0.5 136.8 10 2M190Z 190 2.6 825 8000 0.25 0.5 144.8 10 2M200Z 200 2.5 900 8000 0.25 0.5 152.0 9 Notes: 1. TOLERANCES - Standard Voltage tolerance = 5%, tolerances may be considered as a special device 2. ZENER VOLTAGE(V ) MEASUREMENT - Zener voltage guaranteed when measured at 0.375 (9.5mm) from the Z body under 40ms 10ms current pulse and ambient temperature of 25C 3. ZENER IMPEDANCE (Z ) DERIVATION - The zener impedance is derived from 60 cycles AC voltage, which results when Z an current having an rms value eqal to 10% of the DC zener current (I or I ) is superimposed on I or I ZT ZK ZT ZK 4. MAXIMUM ZENER CURRENT (I ) NON-REPETITIVE - The rating listed in the electrical characteristics table is maximum peak ZM non - repetitive reverse surge current of 1/2 sine wave of 1/120 second duration or equivalent square wave, superimposed on the test current I , per JEDEC standard. ZT Document Number: DS D1409044 Version: M15