For General Electronic Equipment Notice for TAIYO YUDEN Products (General Environment) Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2017. All of the contents specied herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or use of our products. Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or equipment incorporating our products, which are caused under the conditions other than those specied in this catalog or individual product specication sheets. Please contact TAIYO YUDEN for further details of product specications as the individual product specication sheets are available. Please conduct validation and verification of our products in actual condition of mounting and operating environment before using our products. The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric appliances, office equipment, information and communication equipment including, without limitation, mobile phone, and PC) and medical equipment classied as Class I or II by IMDRF. Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation, automotive powertrain control system, train control system, and ship control system, traffic signal equipment, disaster prevention equipment, medical equipment classified as Class III by IMDRF, highly public information network equipment including, without limitation, telephone exchange, and base station). Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment, aviation equipment*, medical equipment classied as Class IV by IMDRF, nuclear control equipment, undersea equipment, military equipment). *Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g., in-ight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specied separately by TAIYO YUDEN. Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment. When our products are used even for high safety and/or reliability-required devices or circuits of general electronic equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to install a protection circuit as necessary. Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above. Information contained in this catalog is intended to convey examples of typical performances and/or applications of our products and is not intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights. Please note that the scope of warranty for our products is limited to the delivered our products themselves and TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products. Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in accordance with such agreement. The contents of this catalog are applicable to our products which are purchased from our sales offices or authorized distributors (hereinafter TAIYO YUDEN s ofcial sales channel ). Please note that the contents of this catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN s official sales channel. Caution for Export Some of our products listed in this catalog may require specic procedures for export according to U.S. Export Administration Regulations , Foreign Exchange and Foreign Trade Control Law of Japan, and other applicable regulations. Should you have any questions on this matter, please contact our sales staff. INDUCTORS POWER INDUCTORS WIRE-WOUND CHIP POWER INDUCTORS(BR SERIES) WIRE-WOUND CHIP POWER INDUCTORSBR SERIES REFLOW REFLOW PARTS NUMBER * Operating Temp.-40+105Including self-generated heat Blank space B R L 2 5 1 8 T 2 R 2 M Series name Packaging Code Series name Code Packaging BR Wire-Wound chip power inductor T Taping Characteristics Nominal inductance Code Characteristics Code Nominal inductance H FL example L Low profile R20 0.2 HL 1R0 1.0 C High current 100 10 101 100 DimensionsLW RDecimal point Dimensions Code Typeinch Inductance tolerance LWmm Code Inductance tolerance 1608 16080603 1.60.8 K 10 2012 20120805 2.01.25 2016 20160806 2.01.6 M 20 2518 25181007 2.51.8 Internal code 3225 32251210 3.22.5 STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY Recommended Land Patterns Surface Mounting Mounting and soldering conditions should be checked beforehand. L W Applicable soldering process to these products is reflow soldering only. Type A B C 1608 0.55 0.70 1.00 T C 2012 0.60 1.00 1.45 2016 0.60 1.00 1.80 e 2518 0.60 1.50 2.00 AAB 3225 0.85 1.70 2.70 Unitmm Standard quantitypcs Type L W T e Paper tape Embossed tape 1.60.2 0.80.2 0.7 max 0.450.15 BR L1608 3000 0.0630.008 0.0310.008 0.028 max 0.0160.006 1.60.2 0.80.2 0.80.2 0.450.15 BR C1608 3000 0.0630.008 0.0310.008 0.0310.008 0.0160.006 2.00.2 1.250.2 1.0 max 0.50.2 BR L2012 3000 0.0790.008 0.0490.008 0.040 max 0.0200.008 2.00.2 1.250.2 1.4 max 0.50.2 BR C2012 2000 0.0790.008 0.0490.008 0.056 max 0.0200.008 2.00.2 1.60.2 1.60.2 0.50.2 BR C2016 2000 0.0790.008 0.0630.008 0.0630.008 0.0200.008 2.50.2 1.80.2 1.0 max 0.50.2 BRFL2518 3000 0.0980.008 0.0710.008 0.040 max 0.0200.008 2.50.2 1.80.2 1.2 max 0.50.2 BR L2518 3000 0.0980.008 0.0710.008 0.048 max 0.0200.008 2.50.2 1.80.2 1.5 max 0.50.2 BRHL2518 2000 0.0980.008 0.0710.008 0.060 max 0.0200.008 2.50.2 1.80.2 1.80.2 0.50.2 BR C2518 2000 0.0980.008 0.0710.008 0.0710.008 0.0200.008 3.20.2 2.50.2 1.7 max 0.750.2 BR L3225 2000 0.1260.008 0.0980.008 0.068 max 0.030.008 Unitmminch i wound BR e-E05R01 This catalog contains the typical specicfi ation only due to the limitation of space. When you consider the purchase of our products, please check our product specicfi ation sheets. F o r d e t a i l s o f e a c h p ro d u c t (c h a r a c t e r i s t i c s g r a p h , re l i a b i l i t y i n f o r m a t i o n , p re c a u t i o n s f o r u s e , a n d s o o n), s e e o u r w e b s i t e ( h t t p : // w w w. t y - t o p . c o m / ) . 77