Wireless Module 802.11ac/a/b/g/n WYSEGVDXG , WBSEGVDXG & WKSEGVDXG Overview May, 2019 Version 1.0RF Connector WYSEGVDXG : 802.11ac 1x1+Bluetooth v4.2 Module Features Block Diagram Standard: IEEE802.11a/b/g/n/ac + Bluetooth v4.2 Low standby current (with advanced power save and sleep mode) VBAT Dual Band Antenna Data Rate: VDD33 VIO 11/5.5/2/1 Mbps(11b), 54/48/36/24/18/12/9/6 Mbps(11a/g), 2.4GHz VIO SD Tx 150~6.5 Mbps (11n, MCS7~0, HT20/40) VIO RF 433.3~29.3 Mbps (11ac MCS9~0, VHT80) BT BPF SW SDIO ANT2 Interface: SDIO Rx PCM Built-in Diplexer, 2G-PA, 5G-PA, 5G-LNA, OTP, RF clock, DC/DC Power PDn 88W8887 Security: TKIP, WEP, AES, CCMP, CMAC, WAPI,WPA/WPA2(64bit/128bit) Sleep clock Outline: 24.0 x 11.5 x 2.0 (Max) mm, SMD Type, Metal case shielding On-board RF Connector Crystal ANT1 Diplexer GH Certification: FCC, ISED and MIC Regulation GND ETSI EN 300 328 / EN301 893 v2.1.1 conducted test report available RoHS Compliant General Electrical Specification Parameter Description Min. Typ. Max. Units 11b / g / n (HT20/HT40) 2412 2472 MHz Outline Frequency 11a/n / ac (HT20/HT40/HT80) 5180 5825 MHz Unit: mm Range BT/BLE 2402 2480 MHz 24.0 VDD33 3.0 3.3 3.6 Operation V Voltage VIO 1.62/3.0 1.8/3.3 1.98/3.6 11b/11g/11n-2G(HT20/HT40) 10/10/10/8 12/12/12/10 14/14/14/12 TX Output 11a/n-5G(HT20/HT40)/ac (VHT80) 10/10/8/6 12/12/10/8 14/14/12/10 dBm Power BT/BLE -6/-6 0/0 2/2 11b/11g/11n-2G(HT20/HT40) - -87/-73/-69/-66 -76/-65/-64/-61 RX Sensitivity 11a/n-5G(HT20/HT40)/ac (VHT80) - -71/-68/-65/-57 -65/-64/-61/-51 dBm BT / BLE - -86/-86 -70/-70 mW Burst Mode TX 11b (Duty=46.8%) - 488 Power 11ac RX 5G 358 mW Consumption Sleep Mode 1.8 mW General Operation Temperature Range deg-C -30 25 85 (Shielding case surface temperature) Note: The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO.,LTD. is under license. Page 2 11.5 2.0 max