ALD Series LED Backlighting DC-DC Converters Features u Two to Five Strings u 12VDC Input u Analog or Resistive Dimming u Low Pro le u Off the shelf solution Key Market Segments & Applications Speci cations Model ALD-214012PJ111 ALD-310012PJ125 ALD-414012PJ126 ALD-514012PJ134 Number of LED Strings - 2 3 4 5 DC Input VDC 10.8 - 13.2VDC Input Current Max.(norm./inhib.) A 1.2 / 0.001A 1.5 / 0.001A 2.0 / 0.001A 2.5 / 0.001A Output Current (each string) mA 140mA 100mA 140mA 140mA Dimming Frequency Hz 200Hz 225Hz 200Hz 200Hz Analog Dim. (Dark to Light) Vbr VDC 2.5V to 0V 0V to 4V (Vbr2) 2.5V to 0V 2.5V to 0V Analog Dim. (Dark to Light) Rbr k 50 - 0k 0 - 10k 50 - 0k 50 - 0k PWM Dimming VDC 2.5V to 0V 0 to 2.5V 2.5V to 0V 2.5V to 0V Remote On/Off (Vrmt) VDC OFF: 0V - 0.4V, ON: 2.5V - Vin Maximum Output Voltage VDC 44V 38V 44V 44V Overvoltage Alarm VDC Approximately 5V if any one string is open Operating Temperature C -30 to +85C Storage Temperature C -40 to +85C Maximum Humidity (1) %RH 95%RH (Storage or Operating) Cooling - Convection Input to Output Isolation - None 2 Vibration - 588m/s (60G) 11ms Half-sine wave once each axis X,Y,Z,-X,-Y,-Z total 6 times 2 Shock - 5~10Hz Amplitude 10mm 10~200Hz Accelerated Velocity 21.6m/s (2.2G) Weight (Typ) g 9g 9g 22g 22g Size (LxWxH) mm 85 x 21.5 x 5mm 85 x 21.5 x 5.5mm 100 x 50 x 5.2mm 100 x 50 x 5.2mm Warranty Yr One Year Note: See Installation Manual for full details, test methods of parameters and application notes (1) non condensing 1-800-526-2324 www.us.tdk-lambda.com/lp/ 7(iii) NTH 4-3.5 50 420.3 (2.0) (ii) (2.0) (i) 8 8 ALD Series Outline Drawing ALD-214012PJ111 any parts and pattering inhibit area except GND pattern. TOP View CP3:Freq. Check Pad (i) (ii) NTH 2- 3.5 85 770.3 (1.0) 8 8 (iii) (71.3) ALD-310012PJ125 TOP View SIDE View 85. 0 0.5 2- 3.5 0.2 4.0 0.4 77. 0 0.4 (4) (ii) example (refer to *1-1 Marking) CN1 Product Name,Lot No.,name of origin BOTTOM View 1 CP6 / (8) (8) (iii) (i) any parts and pattering inhibit area except GND pattern. When LED driver is fixing, please confirm screw head and plate form is located within above hatching area include any tolerances. Please insulate it with the case such as sheet metals. Unit in mm Tolerance is 0.5mm unless otherwise specified. Mass:9g(max) ALD-414012PJ126 &No. Part Description Item/Material Qty. Remark corresponding connector TOP View ALD-514012PJ134 (i) Input Connector: CN1 SM08B-SRSS-TB(LF)(SN) 1 JST SHR-08V-S-B SIDE View 8 8 (ii) Output Connector: CN3 SM06B-SRSS-TB(LF)(SN) 1 JST SHR-06V-S-B Tolerance is 0.5mm (iii) Print Cicuit Board: PCB FR-4 1 UL94V-0 t=1.0mm unless othe-rwise specified. Unit in mm Mass:22g max. *CN2 is not installed. example (refer to *1-1 Marking) BOTTOM View any parts and pattering inhibit area Product Name, Lot No. name of origin except GND pattern. ALD- 310012PJ125 9401 JAPAN (13.4) (37.0) 920.3 When LED driver is fixing, please confirm screw head and plate form is located within Unit in mm 100 above hatching area include any tolerances. Mass:9g max No. Tolerance is 0.5mm unless otherwise specified. Part Description Item/Material Qty. Remark corresponding connector (iii) (i) Print Circuit Board: PCB FR-4 1 For UL94V-0 Additional Information, please visit =1.0 - (ii) us.tdk-lambda.com/lp/products/ald-series.htm1 Input Connector: CN1 53261-0871 Molex 51021-0800 Output Connector: CN2 SM06B-SRSS-TB(LF)(SN) 1 JST SHR-06V-S-B 1-800-526-2324 www.us.tdk-lambda.com/lp/ 8 Revision A5: Nov 2011 21.5 0.5 (4) 13.5 0.4 4.0 0.4 8 8 (1.0) (1.1) CN2 1 (1) 13.50.3 4.0 typ. 21.5 5.2 max. 5.5Max. ALD- 214012PJ111 8Z01 JAPAN