DSP Series 7.5W to 100W Low Pro le DIN Rail Mount Power Supplies Features Low Pro le for Building Automation 5V to 24V Outputs Wide Range AC Input (1) UL1310 Class 2 Class II Double Insulation -25 to +71C Operation Key Market Segments & Applications Speci cations Model DSP10 DSP30 DSP60 DSP100 AC Input Voltage range VAC 90 - 264VAC, Class II double insulated (No ground connection required) Input Frequency Hz 47 - 63Hz DC Input Voltage range VDC 120 - 370VDC* Inrush Current (115 / 230VAC) A 15 / 30A 25 / 50A 30 / 60A 30 / 60A Power Factor & Flicker - Meets EN61000-3-2, EN61000-3-3 Output Voltage Accuracy % 1% of Nominal Line Regulation % 1% Load Regulation % 1% Ripple and Noise (20MHz BW) mV 50mV Overcurrent Protection (Typ) - 110 - 160%, fold forward under short circuit (DSP100-24/C2 102-108%) Overvoltage Protection V 120 - 145% Hold Up Time (115VAC input) ms See Model Selector LED Indicators - Green LED = On, Red LED = DC Output Low Operating Temperature C -25 to +71C (Derate linearly 2.5%/C from 55 to 71C) Temperature Coef cient %/C 0.02%/C Storage Temperature C -25 to +85C Operating Humidity - 20 - 95% RH (non condensing) Cooling - Convection Withstand Voltage - Input to Output 3kVAC for 1 min. Isolation Resistance - >100M at 25C & 70%RH, Input to Output 500VDC Vibration (Operating) IEC 60068-2-6 (Mounting by rail: Random wave, 10-500 Hz, 2G, ea. along X, Y, Z axes 10 min/cycle, 60 min) Shock (Operating) IEC 60068-2-27 (Half sine wave, 4G, 22ms, 3 axes, 6 Faces, 3 times for each face) (1) Safety Agency Approvals - UL1310 Class 2 , UL508 Listed, UL60950-1, EN60950-1, CE Immunity - EN61000-4-2, -3, -4, -5, -6, -8 & -11 Conducted & Radiated EMI - DSP10: EN55022 Class B DSP30-100: EN55022 Class A Weight (Typ) g 60 200 250 320 Size (WxHxD) in 0.71 x 3.58 x 2.19 2.09 x 3.58 x 2.19 2.8 x 3.58 x 2.19 3.54 x 3.58 x 2.24 Case material - Flame Retardant Polycarbonate (UL94 V-0) Warranty yrs Three years (1) See model selector on page 2. *Safety certi ed for AC only 1-800-526-2324 www.us.tdk-lambda.com/lp/ 41 Disclaimer: us.tdk-lambda.com/lp/legal.htmDSP Series Model Selector Voltage Ef ciency Hold Up Time UL1310 Model Voltage (V) Adjust (V) Current (A) Power (W) (Typ %) 115VAC in (ms) Class 2 DSP10-5 5 None 1.50 7.5 74 10 Yes DSP30-5 5 5 - 5.5 3.00 15.0 74 25 Yes DSP60-5 5 5 - 5.5 7.00 35.0 80 16 - DSP10-12 12 None 0.83 10.0 78 10 Yes DSP30-12 12 12 - 14 2.10 25.2 82 25 Yes DSP60-12 12 12 - 14 4.50 54.0 84 16 Yes DSP100-12 12 12 - 14 6.00 72.0 82 16 - DSP10-15 15 None 0.67 10.1 78 60 Yes DSP30-15 15 13.5 - 16.5 2.00 30.0 83 25 Yes DSP60-15 15 13.5 - 16.5 4.00 60.0 85 12 Yes DSP100-15 15 13.5 - 16.5 5.00 75.0 85 16 - DSP10-24 24 None 0.42 10.1 80 60 Yes DSP30-24 24 24 - 28 1.30 31.2 83 25 Yes DSP60-24 24 24 - 28 2.50 60.0 86 12 Yes DSP100-24/C2 24 20 - 24.2 3.80 91.2 89 10 Yes DSP100-24 24 24 - 28 4.20 100.8 85 10 - DSP10 Outline Drawing DSP30 Outline Drawing mm inch mm inch 14.20 9.75 14.20 9.75 18.00 43.1 43.1 53.00 12 1 4 LN 91.00 LN 91.00 34 56 DSP60 Outline Drawing DSP100 Outline Drawing mm inch mm inch 14.20 9.75 14.20 9.75 71.00 43.1 89.9 43.1 1 4 14 DC LO DC ON 91.00 91.00 56 56 Snap-on Mounting: snap onto DIN Rail TS35/7.5 or TS35/15. Other DIN Rail Products (no tools required) DSP/DPP 10W to 480W, 5V to 48V power supplies For Additional Information, please visit DLP 75W to 240W power supplies us.tdk-lambda.com/lp/products/dsp-series.htm DLP-PU Redundancy Module (20A) R Series 3A to 30A single & three phase EMI Filters 1-800-526-2324 www.us.tdk-lambda.com/lp/ 42 Revision B7: Sept 2014 91.00 91.00 32.10 49.00 32.10 49.00 55.6 55.6 91.00 91.00 32.10 49.00 32.10 55.6 49.00 56.8