DTM110-C8 Series Specification Model DTM110-C8 Input Input Voltage range Vac 90 - 264 Input Frequency Hz 47 - 63 Input Current (90Vac) A 2 Inrush Current at 230Vac (Cold Start) A <120 (25C ambient) Touch Current uA <100 No Load Power Consumption mW <150 Hold Up Time (typ) at 115Vac Input ms 10 Average Efficiency (1) % >89 Conducted & Radiated EMI - EN55011-B, EN55032-B, FCC Part 15 Class B, FCC Part 18 Class B Immunity - EN60601-1-2, IEC60601-1-2 Ed4:2014 Insulation Class - Class II Safety Agency Certicfi ations - IEC/UL/CSA/EN60601-1, ANSI/AAMI ES60601-1, IEC/UL/CSA/EN62368-1, 60950-1, CE Mark (LVD, EMC and RoHS) Output Output Voltage Adjustment - None Switching Frequency (Full Load) kHz 45 - 65 Total Regulation - See Model Selector Table Ripple & Noise (2) mVpk-pk 150 Temperature Coefficient %/C 0.05 Minimum Load - No minimum load required Overcurrent Protection % 105 - 150 (Auto-Recovery) Overvoltage Protection - See Model Selector Table (Cycle input power to reset) Short Circuit Protection - Continous - Hiccup Mode (Auto-Recovery) Indicators - LED indicates DC output is on Parallel Operation - Not possible Environmental Operating Temperature C -20 to +60 derate linearly to 50% load from 40 to 60 Derate linearly to 80% load from 0 to -20 Storage Temperature C -20 to 85 Humidity (non condensing) %RH 0 - 95 Cooling - Convection Altitude m 5,000 Withstand Voltage (For 1 minute) Vac Input to Output 4,000 (2xMOPP) Isolation Resistance M 20 IP Rating - IP41 2 Vibration (Operating) m/s 23.52 (10 - 55Hz: constant sweep 1 min X, Y, Z for 1 hour) 2 Shock m/s <196.1 (20G) Other Weight (Typ) g 780 Size (LxWxH) mm 140 x 63 x 33 Size (LxWxH) Inches 5.50 x 2.48 x 1.29 AC Input Connector - IEC 320-C8 (2 prong) DC Output Connector (3) - Kycon KPPx-4P or equivalent Pins 1 & 2: -Vout, Pins 3 & 4: +Vout Cable Length & Thickness 1000mm 12 to 28V Models: UL2464 16 AWG, 36 to 48V Models: UL2464 18 AWG MTBF (Bellcore TR-332), 100% load, 25C hrs 350,000 Warranty yrs 3 Notes See website for detailed specifications, test methods and installation manual (1) Measured at 25%, 50%, 75% and 100% load conditions (2) Ripple and noise is measured at 20MHz BW. Add 0.1uF ceramic capacitor and 47uF Electrolytic capacitor in parallel across the output (3) Other DC output connectors are available. Contact local sales office. 2 DTM110-C8 Series