I6A4W020A033V-0S1-R TDK-Lambda

i6A4W Series Specification Model i6A4W010A033V i6A4W020A033V Input Input Voltage Range Vdc 9 to 53V (Turn on at 8V typ) Input Current A 20A maximum Efficiency % 94 - 97.5 90 - 97.0 Safety Agency Certifications - IEC/UL/CSA/EN 62368-1, IEC/UL/CSA/EN 60950-1, CE Mark Output Output Voltage Tolerance % 4 Switching Frequency kHz 400 Line Regulation % 0.3 0.4 Load Regulation % 0.9 1.2 External Load Capacitance uF 0 - 1500 Output Ripple & Noise (pk-pk) mV 50 20 Overcurrent Protection Threshold A 15 27 Remote On / Off - See options table Remote Sense - (+) Sense, compensating up to 5% of output voltage Power Good - Optional (Full Feature Version) Frequency Synchronization - Optional (Full Feature Version) Output Sequencing - Optional (Full Feature Version) Parallel Operation - Not possible Series operation - Not possible Environmental Operating Temperature C -40 to 125 (see thermal data on website) Storage Temperature C -55 to 125 Cooling - Convection or forced air Other Weight g 15 Size (LxWxH) mm DIP Version: 33 x 22.9 x 12.1, SIP Version: 33 x 11.4 x 24.8 Size (LxWxH) In DIP Version: 1.30 x 0.9 x 0.74, SIP Version: 1.30 x 0.45 x 0.98 MTBF - Telcordia SR-332 - > 12 Mhrs 100% Load Ta = 40 C Warranty yrs 3 Notes See website for detailed specifications. (1) Output voltage cannot exceed input voltage. Refer to Input vs. Output graphs provided. (2) Full Feature module but without the SEQ (Sequencing) Pin 34 installed. This eliminates the need for external pull-up resistor when Sequencing feature is not being used. (3) If the Sequencing feature will not be used, the SEQ Pin 34 needs to be tied to a 1.8-3.3V source via a 10k resistor. See Full specification for details. Typical Application Circuit Recommendation 1. TRIM resistor Rup should be connected to the i6A module as close as possible. 2 i6A4W Series