KPSA Series 4-15W AC-DC Board Mount Power Supplies Features Low pro le Smaller footprint PC board Mountable Low Cost UL Class II Approved Wide input range No external components needed Key Market Segments & Applications Speci cations Model KPSA-5 KPSA-10 KPSA-15 Input Voltage range - 85 - 264VAC (47 - 63Hz) or 110 - 370VDC* Inrush Current A 30A at 240VAC, cold start at 25C Input Current (115/230VAC) A 0.13 / 0.07 0.27 / 0.13 0.4 / 0.2 Leakage Current mA 0.25mA maximum Temperature Coe cient - 0.05%/C Voltage Accuracy - 1% Minimum Load A None Load Regulation - 1% (10% to 100% load) Line Regulation - 0.5% (100-240VAC line change) Ripple & Noise (1) mV 1% or 50mV whichever is greater Short Circuit Protection - Continuous - hiccup mode Overvoltage Protection V 130-150%, Zener clamp E ciency (typical) % 72% 75% 75% Hold Up Time (Typ 115VAC input) ms 14ms at full load LED Indicator - Green LED = OK Operating Temperature (2) C Convection cooling: 0 to +70C, derating linearly to 25% load from 40 to 70C Storage Temperature C -20 to +85C Humidity (non condensing) - 10 - 95% RH Cooling - Convection or forced air Withstand Voltage - Input to Output 3kVAC 2 Vibration (non operating) - 23.52m/s (10 - 55Hz: constant sweep 1 min X, Y, Z for 1 hour) 2 Shock - < 196.1 m/s (20G) Safety Agency Approvals - IEC/UL/CSA/EN62368-1, 60950-1, Class II, CE Mark Conducted & Radiated EMI - EN55022-B, FCC Class B Immunity - EN61000-4 -2, -3, -4, -5, -6 Weight (Typ) g(oz) 29g (1oz) 60g (2oz) 80g (2.8oz) Size (WxLxH H above pcb) in. 1.28 x 2.17 x 0.83 1.55 x 2.40 x 0.9 1.77 x 2.75 x 0.79 Warranty yr One Year *Safety certi ed for AC input only. Notes: (1) Measured with 0.1uF ceramic & 10uF electrolytic at 20MHz BW (2) 20CFM forced air ratings: KPSA5: 0 - 70C full load KPSA10: 0 - 70C full load (3.3V & 5V models derate linearly to 80% load from 50 to 70C) KPSA15: 0 - 70C derate linearly to 80% load from 50 to 70CKPSA Series Model Selector (other voltages available) KPSA5 Outline Drawing Output Maximum Peak Load Output Model Voltage (V) Output (A) (A)(3) Pwr (W) KPSA5-3R3 3.3 1.25 - 4.1 KPSA5-5 5 1.0 - 5.0 KPSA5-12 12 0.42 - 5.0 KPSA5-15 15 0.33 - 5.0 KPSA5-24 24 0.23 - 5.5 KPSA10-3R3 3.3 2.5 3.8 8.3 KPSA10-5 5 2.0 2.8 10.0 KPSA10-12 12 0.84 1.2 10.1 KPSA10-15 15 0.67 1.0 10.1 KPSA10-24 24 0.42 0.65 10.1 KPSA15-3R3 3.3 3.0 4.5 9.9 KPSA15-5 5 3.0 4.0 15.0 KPSA15-12 12 1.25 1.8 15.0 KPSA15-15 15 1.0 1.5 15.0 KPSA15-24 24 0.63 0.95 15.1 Notes (3) Average not to exceed max power, <30s, 10% duty cycle KPSA10 Outline Drawing KPSA15 Outline Drawing For Additional Information, please visit