PFE300-700S Series 300 to 700W AC-DC Power Module Features Low pro le, small size 100C baseplate temperature High power density High Ef ciency Suitable for conduction cooling Power Factor Corrected (PFC) Key Market Segments & Applications Speci cations PFE300S PFE700S Model PFE500S AC Input VAC 85 to 265VAC, 47-63Hz (up to 440Hz) (3) Input Current (100 / 220VAC) A 4.0 / 2.0 8.8 / 4.4 Model dependant 6.2 / 3.2 Inrush Current (100 /200VAC) (1) A 20 / 40 peak Power Factor - 0.95 minimum, meets EN61000-3-2 Output Voltage Setpoint Accuracy - 2% 1V Ripple and Noise (1) - 1% 4V Over Current Protection % 105 - 140% (Automatic Recovery) Over Voltage Protection - 125 - 145% 60 - 69.6V Series Operation - Yes Parallel Operation - No Yes (Droop mode) Power On Signal (ENA) - Open collector (10mA sink current). Low (on) when output is present Auxiliary Supply - None None Remote On/Off (Opto isolated) - None None Overtemperature Protection - Yes Operating Baseplate Temp. C -40 to +100C (2) Storage Temperature C -40 to +100C Humidity (non condensing) - Operating: 20 - 95%RH, Non Operating: 10 - 95%RH Cooling - Conduction Withstand Voltage (1 min) - Input to Output 3kVAC, Input to Baseplate 2.5kVAC, Output to Baseplate 1.5kVDC Isolation Resistance - Output to baseplate: 100M Ohm at 500VDC, 25C ambient, 70%RH 2 Vibration (non operating) - 10-55Hz (1 min sweep), constant amplitude 0.825mm (max 49m/s ), X, Y, Z 1 hour each 2 Shock - 196.1m/s Safety Certi cations - UL60950-1, CSA60950-1 (cUL), EN60950-1, CE mark (LVD) Weight g 250 250 Size (WxHxL) mm 61 x 12.7 x 116.8mm in 2.4 x 0.5 x 4.6 Warranty yrs 2 years Notes: (Consult Installation Manual for detailed speci cations, test methods and application notes) 1) External components are required, consult Application Notes 2) PFE500S-12, -40 to 85C. See instruction manuals for derating curves 3) Reduced PFC above 63Hz. Contact technical support for 440Hz operation. 1-800-526-2324 www.us.tdk-lambda.com/lp/ 85 Disclaimer: us.tdk-lambda.com/lp/legal.htmPFE300-700S Series Speci cations Output Adjust. Maximum Maximum Load Line Ef ciency Model Voltage (V) Range (V) Current (A) Wattage (W) Reg. (mV) Reg. (mV) typ PFE300S-12 12 9.6 - 14.4 25 300 48 48 81 / 83 PFE500S-12 12 9.6 - 14.4 33 396 48 48 82 / 83 PFE300S-28 28 22.4 - 33.6 10.8 302 56 56 83 / 85 PFE500S-28 28 22.4 - 33.6 18 504 56 56 84 / 86 PFE300S-48 48 38.4 - 57.6 6.3 302 96 96 84 / 86 PFE500S-48 48 38.4 - 57.6 10.5 504 96 96 84 / 86 PFE700S-48 51 None 14 714 50 - 57V (4) 86 / 89 (4) Total regulation range PFE500S Outline Drawing Heatsink Table Heatsink Size (mm) PFE Module HAF-10L 116.8 x 25.4 x 61 PFE300/500/700S HAF-15L 116.8 x 38.1 x 61 PFE300/500/700S HAF-15T 116.8 x 38.1 x 61 PFE300/500/700S HAL-F12T 122 x 35 x 69.9 PFE500F HAM-F10T 160 x 33.4 x 100 PFE1000F Options Suf x Description Blank M3 tapped mounting inserts (4) /T 3.3mm non-threaded inserts (4) For Additional Information, please visit us.tdk-lambda.com/lp/products/pfe-series.htm PFE500S Basic connection 1-800-526-2324 www.us.tdk-lambda.com/lp/ 86 Revision C3.1: Sept. 2014