AC-DC Single Output Power ModulePFHC (AC-DC Conversion) and DC-DC PFHC (AC-DC Conversion) and DC-DC Conversion Integrated in One Package. Conversion Integrated in One Package. Full Function (F type) 2-in-1 Design Concept One module now contains the functions previously By utilizing output current balancing function, parallel operation up to 6 units is possible. only obtainable by combining a front-end module with a high voltage input DC-DC converter. The ON/OFF Control. ON/OFF control is possible product is made using a wide range input AC-DC even there is no ON/OFF in input circuit. front end function (harmonic current control and ON/OFF control circuit is in between primary & power factor correction) and DC-DC back-end secondary isolation. (voltage conversion and isolation) in 1 package). Inverter Operation Good signal Auxiliary Supply available Huge reduction in space High Power Density:0.95/ High Efficiency:89%/ old product PFE Series Input Voltage:85 265VAC Enhanced Surge Immunity Level PFHC is provided, primary and secondary isolation for better safety and wide input range. High It is possible to clear 6kV surge voltage in normal efficiency with up to 100 base plate temperatures. and common mode (absorber is installed in the input PFE500S-12, PFE500F-12: Up to 85 filter). Solution to Serve Different Kinds of Market Demands PFE series features offer many reliable solutions PFE Series Thanks to its compact size and reduction in cost, power distribution is easier to construct than Regulated Output AC Input before. More over, high power density and N+1 redundant parallel operation increase the EMI Filter Load 12V,28V,48V reliability. High base plate temperature and 6kV surge immunity level makes PFE series suitable to be used in harsh outdoor environment. After all, new functions are added to each models to give Application Example reliable solution to many market demands.