PFH500F-28-000-R TDK-Lambda

PFH500F Series Related Products Part Number Description AC-DC Power Module PFH500A-28 85-135 Vac / 375-420 Hz Input, 28Vdc 500W Module Heatsink HS00110 2.4 x 4 x 1.5 aluminum heatsink with cylindrical pin fins with integrated thermal pad Inrush Resistor AR00719 22 1.6W Thermal fuse resistor EMI Common Mode Choke ARA00499 6.3 mH Common Mode Inductor, Through Hole Evaluation Kits PFH05W12-100-EVK-S1 Evaluation board with a PFH500F-12-100-R module and heatsink fitted PFH05W12-1D0-EVK-S1 Evaluation board with a PFH500F-12-1D0-R module and heatsink fitted PFH05W28-100-EVK-S1 Evaluation board with a PFH500F-28-100-R module and heatsink fitted PFH05W28-1D0-EVK-S1 Evaluation board with a PFH500F-28-1D0-R module and heatsink fitted PFH05W48-100-EVK-S1 Evaluation board with a PFH500F-48-100-R module and heatsink fitted PFH05W48-1D0-EVK-S1 Evaluation board with a PFH500F-48-1D0-R module and heatsink fitted Specifications Model PFH500F-12 PFH500F-28 PFH500F-48 Input Input Voltage Range Vac 85 - 265 (low line derating may apply) Input Frequency Hz 47 - 63 Input Current (115/230 Vac) A 5.0 / 2.5 Inrush Current A 9 / 18 (20A peak) Leakage Current - Will depend on the value of the external Y capacitors (refer to evaluation data) Power Factor (230Vac, 80% load) - >0.95 Harmonic Compliance - Meets IEC61000-3-2 No Load Power Consumption See evaluation report on website Hold-up Time ms Will depend on the value of the external bulk capacitance (refer to evaluation data Efficiency (typ 115/230Vac, 100% Load) % 90 / 92 90 / 92 89 / 91 Conducted & Radiated EMI - EN55032 Class B (See Instruction Manual for conditions) Immunity - Meets IEC61000-4-2, -3, -4, -5, -6, 8, -11, -12, -14 (refer to immunity report) Insulation Class - Class II Safety Certifications and Markings - IEC/UL/CSA/EN62368-1, 60950-1, CE Mark and UKCA Mark Output Output Voltage Setpoint Tolerance % 2% (115Vac, Io = 0%) Line Regulation (50% Load) % 0.3 0.15 0.1 Load Regulation (115/230Vac) (2) % 0.125 (10% to 100% load) 0.1 0.1 Droop Rate (-xDx-R suffix) mV/A 25 50 100 Ripple & Noise mV 150 400 400 Minimum Load - No minimum load required Overcurrent Protection (hiccup) A 47.5 21.5 12.5 Overvoltage Protection (max) V 15.7 25.5 55 Overtemperature Protection C Input line / output load dependent (Refer to Instruction Manual) Remote Sense - Yes Remote ON/OFF - Negative Logic Low (< 1V) = Module On (300 A, 3.3V max) Power Good - Active Low (< 1 Vdc 150 mA, 50V max) Auxiliary Output Vdc 10 - 14 200 mA max. External Load Capacitance (CC Mode) uF 3,000 - 10,000 470 - 6,000 470 - 4,000 External Load Capacitance (CR Mode) uF 3,000 - 45,000 470 - 20,000 470 - 6,000 Series Operation - Yes Parallel Operation - Yes. Droop mode current share models and main output voltage only (refer to suffix xDx-R) 2 PFH500F Series