PXC-M06 (W) Series www.emea.tdk-lambda.com/pxc-m Single and Dual Output 6W DC-DC Converters 0HGLFDO &RPP Features Benefits 60601-1 approval Easier system approval I/O isolation 5kVAC, 2MOPP Patient protection at 250VAC r m s working volt age 0.25 A low leakage Wide range of medical applications 4:1 Wide input range Less parts to inventory Specification Model PXC-M06 (W) Rated input voltage range 24V nominal: 9-36VDC, 48V nominal: 18-75VDC Input surge voltage (max 3 seconds) 24V Nom : 50VDC 48V Nom: 100VDC Switching frequency 250kHz Maximum input current (no load) See Table Fusing No internal fuse Max output power (W) 6 Voltage accuracy Single/Dual 1% Single output 3.3V, 5V & 12V: 10%,15V & 24V: -10%/+20% Voltage adjustment (Note 1) Dual output 5V, 12V & 15V: 10% Line regulation (LL to HL at full load) Single output 0.2%, Dual output 0.5% Ripple and noise (Note 7) Measured with a 20MHz bandwidth - see table Start up time (Nominal Vin and constant resistive load) Power on: 30ms, Remote ON/OFF: 30ms Start up voltage 24Vin(nom) 9V, 48V(nom) 18V Shutdown voltage 24Vin(nom) 8V, 48V(nom) 16V DC ON: OPEN or 0 to 1.2VDC Remote on/off (option) (Note 1 & Note 6) DC OFF: 2.2 to 12VDC Efficiency See Table Over current protection, factory set Hiccup, 150% of rated full load Short circuit protection (Note 2) Continuous, auto recovery 3.3V output 3.7 to 5V 5V output 5.6 to 7.0V 12V output 13.5 to 16V 15V output 18.3 to 22.0V Overvoltage protection 24V output 29.1 to 34.5V 5V/5V output 5.6 to 7.0V 12V/12V output 13.5 to 18.2V 15V/15V output 17.0 to 22.0V Operating temperature -40C ~ +88C (without derating), +88C ~ +105C (with derating - see curve) Storage temperature -55C ~ +125C Thermal shock MIL-STD-810F Relative humidity (non condensing) 5% to 95% RH Transient response (25% step load change) 250S Isolation voltage (1 minute) (Note8) 5kVAC Isolation capacitance (max) 17pF MTBF MIL-HDBK-217F (Note 3) 644,400 hrs Vibration MIL-STD-810F Conducted and radiated emissions (Note 4) EN55011, EN55022, Class A and FCC part 18 EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6: Immunity (Note 5) Perf. Criteria A Safety IEC60601-1, ANSI/AAMI ES60601-1, EN60601-1, CE Mark Size (H x W x D) 10.2 x 20.3 x 31.8 mm Weight 14g Connector PCB mount Cooling Convection Warranty yrs 2 Notes: See page 2 1 PXC-M06 (W) SeriesModel Selector (7) Input Output Output Current Output Input Current Efficiency Maximum (2) (2) Model Voltage (VDC) Voltage (VDC) Full Load (mA) Ripple & Noise (mV) No Load mA % Capacitive Load PXC-M06-24WS3P3 9 ~ 36 3.3 1800 30 6 83 2100 PXC-M06-24WS05 9 ~ 36 5 1200 30 6 86 1500 PXC-M06-24WS12 9 ~ 36 12 500 40 6 89 260 PXC-M06-24WS15 9 ~ 36 15 400 40 6 89 210 PXC-M06-24WS24 9 ~ 36 24 250 50 6 88.5 75 PXC-M06-24WD05 9 ~ 36 5 600 30 6 85 860 PXC-M06-24WD12 9 ~ 36 12 250 40 6 88.5 150 PXC-M06-24WD15 9 ~ 36 15 200 40 6 88.5 110 PXC-M06-48WS3P3 18 ~ 75 3.3 1800 30 4 82.5 2100 PXC-M06-48WS05 18 ~ 75 5 1200 30 4 86.5 1500 PXC-M06-48WS12 18 ~ 75 12 500 40 4 88 260 PXC-M06-48WS15 18 ~ 75 15 400 40 4 88.5 210 PXC-M06-48WS24 18 ~ 75 24 250 50 4 88 75 PXC-M06-48WD05 18 ~ 75 5 600 30 4 85 860 PXC-M06-48WD12 18 ~ 75 12 250 40 4 88 150 PXC-M06-48WD15 18 ~ 75 15 200 40 4 87 110 Notes 1. Not available for A type pin configuration 2. Typical value at nominal input voltage and full load. 3. MIL-HDBK-217F Notice2 Ta=25 C, Full load (Ground Benign, controlled environment). 4. Built in Class A filter. Class B can be achieved with the addition of exterenal components for further information contact your local TDK-Lambda sales office 5. Meeting EN61000-4-4 and 61000-4-5 requires and additional input electrolytic capacitor: 5V input -1000F/25V, 12V & 24V input - 470F/50V and 48V input - 330F/100V 6. The ON/OFF control pin voltage is referenced to -Vin.The ctrl pin input current is <1mA.Remote off input current is typically 2.5mA 7. For R & N, measure the 24V output with a 4.7F/50V X7R MLCC. All other outputs use a 10F25V X7R MLCC. Nominal input, full load at +25C 8. Reinforced insulation 8mm at 250VAC Outline Drawing PXC-M06 (W) 2 PXC-M06 (W) Series