SWS300/600 Series Single Output General Purpose Power Supplies Features Low Cost Active Power Factor Correction Universal Input (85 - 265VAC) Input Transient Protected IEC61000-4 SEMI F47 Certi ed (208VAC Input) Global safety Approvals Level B EMI Key Market Segments & Applications Speci cations Model SWS300 SWS600 Input Voltage range (1) - 85 - 265VAC (47 - 63Hz) or 120 - 370VDC* Inrush Current (115 / 230VAC) A 20 / 40 at 25C, cold start Power Factor - Meets EN61000-3-2 Input Current (100/200VAC) A 3.6 / 1.8A 7.2 / 3.6A Temperature Coe cient - <0.02%/C Overcurrent Protection - >105%, Constant current style Overvoltage Protection V 3.3V: 4.1-5.3V, 5V: 6.25-7.5V, 12V: 13.8-16.8V 15V: 19.3-24.2V, 24V: 30-34.8V, 36V: 41.4-50.4V, 48V: 60-69.6V Overtemperature Protection - Yes, cycle AC to reset Hold Up Time (Typ) ms 20ms at 115/230VAC Leakage Current (max) mA SWS300: 0.75mA , SWS600: 1.5mA Remote Sense - None Yes Parallel Connection - None Yes Remote On/O - None Yes, >4.5V to shutdown Power Fail Signal - None Yes, open collector output LED Indicator - Green LED = On Operating Temperature C -10 to +65C (See table for derating - model speci c) Storage Temperature C -30 to +85C Humidity (non-condensing) - 30 - 90% RH operating, 10 - 95%RH non operating Cooling - Internal fan Withstand Voltage - I/P to Grnd 2kVAC, I/P to O/P 3kVAC, O/P to Grnd 500VAC, O/P to CNT 100VAC for 1 min Isolation Resistance - >100M at 25C & 70%RH, Output to Ground 500VDC 2 Vibration (non operating) - 10 - 55Hz (sweep for 1 min)19.6m/s constant X, Y, Z 1 hour each plane) Immunity - EN61000-4-2, -3, -4, -5, -6, -8, -11 Safety Agency Approvals - UL60950-1, CSA60950-1, EN60950-1, EN50178, CE Mark, SEMI F47 (208VAC) Conducted & Radiated EMI - EN55011 / EN55022-B, FCC Class B Recommended EMI Filter - MC1206 MC1210 Weight (Typ) g 950 2000 Size (WxHxD) in 2.05 x 4.01 x 7.8 3.62 x 4.72 x 7.48 Warranty yrs Two Years Notes: (1) Derate linearly to 80% load from 115VAC to 85VAC input (derate to 90% load for SWS600-5, no derating SWS300, 600-3) *Safety certi ed for AC input only O B S O L E T E 1-800-526-2324 www.us.tdk-lambda.com/lp/ 99 Disclaimer: us.tdk-lambda.com/lp/legal.htmSWS300/600 Series Model Selector Derating Max Load Line Ripple Model 50C 55C 60C 65C Adjust Curr. Reg Reg Noise E .(3) Model Voltage Range (A) (mV) (mV) (mV) (typ)% SWS300 100% 91.6% 83.3% 50% SWS300-3 3.3V 2.97-3.96V 55 40 20 120 67/70 SWS600 100% 85% 70% 55% SWS300-5 5V 4.5-6V 55 40 20 120 75/78 Additional derating required when operating SWS600 with side SWS300-12 12V 9.6-13.2V 26 96 48 120 77/80 ventilation holes blocked - see installation manual. SWS300-15 15V 13.2-18.6V 21 120 48 120 79/83 SWS300-24 24V 20-28.8V 13 120 48 150 80/84 Options SWS300-36 36V 28.8-40V 8.7 180 72 200 82/85 SWS300-48 48V 40-57.6V 6.7 240 96 240 82/85 Su x Descriptor SWS600-3 3.3V 2.97-3.96V 100 (2) 40 20 100 69/71 /CO2 Double sided conformal coating SWS600-5 5V 4.5-6V 100 (2) 40 20 100 74/77 SWS600-12 12V 9.6-13.2V 50 96 48 120 78/81 Other Industrial Products SWS600-15 15V 13.2-18.6V 40 120 48 120 80/83 SWS600-24 24V 20-28.8V 25 120 48 150 81/84 HWS 15-1500W Single Output, High Reliability SWS600-36 36V 28.8-40V 16.7 180 72 200 81/85 SWS 50-150W Single Output SWS600-48 48V 40-57.6V 12.5 240 96 240 82/85 ZWS 5-240W PCB style Single Output Notes: (2) Peak rating of 120A for 10s (3) 115/230VAC SWS300 Outline Drawing Outline Drawing For Additional Information, please visit us.tdk-lambda.com/lp/products/sws-series.htm O B S O L E T E 1-800-526-2324 www.us.tdk-lambda.com/lp/ 100 Revision B2: Feb 2019