B25620B357K881 TDK

Film Capacitors Power Electronic Capacitors Series/Type: MKP DC Ordering code: B2562* Date: January 2016 Version: 11 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers Please fill in the table and then change the color towhit. This ensures that the table disappears (invisible) for the customer PDF. Don t change formatting when entering or pasting text in the table and don t add any cell or line in and to it Identification/Classification 1 Film Capacitors (header 1 + top left bar): Identification/Classification 2 Power Electronic Capacitors (header 2 + bottom left header bar): Ordering code: (top right header bar) B2562* Series/Type: (bottom right header bar) MKP DC Preliminary data (optional): Department: CAP FILM P PM Date: January 2016 Version: 11 EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS prior express consent is prohibited. EPCOS AG is a TDK Group Company. Film Capacitors B2562* Power Electronic Capacitors MKP DC Construction 1. General data Characteristics Standard capacitance tolerance K: 10% -4 Dielectric dissipation factor (tan ) 2 10 o Service life expectancy 100 000 h at +75C und V hs R DC (refer to section 2) up to 200 000 h (depending on real operating conditions) Fit rate 50 at V and 70 C (refer to section 4) RDC Minimum temperature 55 C min. +85 C for diameter 85 and 90 mm Maximum temperature max. +75 C for diameter 116 mm Storage temperature 55 ... +85 C stg Maximum hotspot temperature +85 C for diameter 85 and 90 mm hs +75 C for diameter 116 mm (refer to section 1) Climatic category 55/85/56 for 85 and 90 mm diameter 55/75/56 for 116 mm diameter Maximum altitude 2000 m above sea level (derating curves available upon request) Test data Voltage between terminals U 1.5 V DC , 10 s TT Voltage between terminals and case U 4000 V AC, 10 s TC Life test According to IEC 61071 Cooling Naturally air-cooled (or forced air cooling) Degree of protection Indoor mounting Design data Impregnation Resin filling: Non PCB, hard polyurethane (dry type) Mounting and grounding M12 threaded bolt on bottom of the aluminum case Max. torque (case) M12 stud 10 Nm Max. torque terminal Female M6: 5 Nm Female M8: 6 Nm Male M8: 8 Nm Reference standards IEC 61071 RoHS compliance Certification: UL 810-5th edition (refer to table 1.3) CAP FILM P PM January 2016 Please read Cautions and warnings and Page 2 of 23 Important notes at the end of this document.