Single-ended Aluminum electrolytic capacitors
Series/Type: B41041
The following products presented in this data sheet are being withdrawn.
Ordering Code Substitute Product Date of Deadline Last Last Shipments
Withdrawal Orders
B43041* B43851 2013-02-22 2013-09-30 2014-03-31
B41041* B41851 2013-02-22 2013-09-30 2014-03-31
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.AEC-C_B41041_B43041.book Seite 3 Dienstag, 5. August 2008 4:02 16
Single-ended capacitors B41041, B43041
Low impedance 105 C
Specifications and characteristics in brief
Rated voltage V 6.3 450 V DC
R
Operating tempera- 40 C +105 C
ture range
Rated capacitance C 0.1 15000 F
R
(20 C, 120 Hz)
Capacitance tolerance 20% M
Load life 2000 h Requirements:
(105 C, V , I ) C/C 20% of initial value
R AC,R
tan 2 times initial specified limit
I initial specified limit
leak
Leakage current I
C V
leak
R R
I 0.03 A ------- -------
or 3 A, whichever is greater
(20 C, after 5 minutes) leak
F V
Dissipation factor For capacitance higher than 1000 F add 0.02 for every increase of 1000 F
tan
6.3 10 16 25 35 50 63 ... 100 160 ... 250 315 ... 450
V (V DC)
R
(20 C, 120 Hz)
0.24 0.20 0.16 0.14 0.12 0.10 0.09 0.15 0.20
tan
Low temperature V (V DC) 6.3 ... 10 16 25 ... 100 160 ... 250 315 ... 450
R
stability (impedance
754 8 6
Z4() 0 C
---------------------------
ratio) (120 Hz)
Z()+20 C
Shelf life After storage for 1000 h at 105 C, the capacitors shall meet the require-
ment of load life test after reforming process. After test: V to be applied for
R
30 minutes, 24 to 48 hours before measurement.
Frequency multiplier Frequency
for rated ripple current
V C 50 Hz 120 Hz 1 kHz 10 kHz 100 kHz
R R
0.1 ... 6.8 F
6.3 ... 100 V 0.4 0.7 0.8 1.0
10 ... 68 F
0.5 0.8 0.9 1.0
100 ... 200 F
0.7 0.9 0.9 1.0
330 ...
0.8 0.9 1.0 1.0
1000 F
2200 ...
0.9 1.0 1.0 1.0
15000 F
0.47 ... 330
160 ... 450 V 0.8 1 1.3 1.4 1.6
Temperature multi- +70 C+85 C +105 C
plier for rated ripple
6.3 ... 100 V 2.0 1.7 1.0
current
160 ... 400 V 1.8 1.4 1.0
Please read Cautions and warnings and
3 08/08
Important notes at the end of this document.