Aluminum electrolytic capacitors Large-size capacitors Series/Type: B41605 Date: October 2015 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS prior express consent is prohibited. EPCOS AG is a TDK Group Company.Large-size capacitors B41605 Compact 125 C Long-life grade capacitors Applications High-reliability equipment in automotive power electronics Applications with highest ripple current load at high frequencies Features High reliability and long useful life, up to 5000 h at 125 C Very high ripple current capability optimized for high frequencies Compact design High vibration stability Storage for up to 15 years at a temperature of up to 35 C. If the capacitor is stored for longer than two years, the operating voltage must be applied for one hour to ensure the specified leakage current. RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case, fully insulated Up to 40 g vibration stability version with middle corrugation Snap-in solder version with pins to hold component in place on PC-board Minus pole not insulated from case Overload protection (safety vent) Without insulation sleeve upon request Terminals Version with wired terminals, weldable and solderable Snap-in with 3 terminals, protection against polarity reversal Please read Cautions and warnings and Page 2 of 18 Important notes at the end of this document.