B43305A9108M000 TDK

Aluminum electrolytic capacitors Snap-in capacitors Series/Type: B43305 Date: December 2010 EPCOS AG 2010. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS prior express consent is prohibited.Snap-in capacitors B43305 Ultra compact 85 C General-purpose grade capacitors Applications Switch-mode power supplies in industrial and entertainment electronics Uninterruptiple power supplies Features Voltage derating (0.93 V ) enables 105 C operation, more R details available upon request Extremely high CV product, ultra compact High ripple current capability Different case sizes available for each capacitance value Capacitors with all insulation versions pass the needle flame test according to IEC 60695-11-5 for all flame exposure times up to 120 s RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case, fully insulated with PVC Version with PET insulation available Version with additional PET insulation cap on terminal side available for insulating the capacitor from the PCB Snap-in solder pins to hold component in place on PC-board Minus pole marking on case surface Minus pole not insulated from case Overload protection by safety vent on the base Terminals Standard version with 2 terminals, 2 lengths available: 6.3 and 4.5 mm 3 terminals to ensure correct insertion: length 4.5 mm Please read Cautions and warnings and Page 2 of 20 Important notes at the end of this document.